V6 User Manual 1.00.book - Studio General

Aux Send RoutingWhen a Strip feeding an Aux Send Bus is of the same type as the Aux Send bus E.g. Stereo strip feeding stereo AuxSend bus 5.1, Strip feeding a 5.1 Bus the sending Strip’s Channels are automatically routed to the correspondingAux Send bus Channel Type. (Left to Left, Right to Right, etc…).Where the sending Strip differs in Type to the Aux Send Bus E.g. a Stereo Strip feeding a 5.1 Aux Send Bus, the routingmust be made manually. The same method is used if you wish to alter auto-routed values.Static Channel RoutingAux Send Channel Routing is set by clicking on the little grid icon adjacent to the knob on the Aux Bus send in thechannel strip. This opens a Channel Routing window:Channel Routing windowShown here with a 5.1 channel feeding a 5.1 Aux Send Bus. Gain values can be entered for each node of the Strip/Bus crossing. Just click on any node and enter a dB value. Enter nothing (no character) or -144.5 to reset the nodeto Mute.ClearAutoClears all nodes to MuteSets a 1 : 1 flat routing as shown aboveMixer : Mixer Components 10 - 168