V6 User Manual 1.00.book - Studio General

Output pin just drag the Remote onto the Controller pin; The right-hand pane is a list of all currently mapped Controllerpins. By clicking in the Mapping Options column you can configure how the pin works.Click OK to accept the changes to the GPI/O configuration, or Cancel to abort.Mapping ExampleMapping Description of Example Shown AboveInput triggering:In 1 :Monitor | Talkback | Artist | Mix Room | OnThe Artist opens the talkback circuit to the Mix RoomIn 2 :Monitor | Talkback | Mixer | Studio | OnThe Mixer (Engineer) opens the talkback circuit to the StudioIn 5 :Monitor | Volume DimDim the Monitor output sectionIn 6 :Mixer | Mute Bus 1 | Reset SoloReset the solo in the MixerIn 8 :Machines | Internal Machine | PlayPut Pyramix in playback. I.e when the Artist is ready.Output are triggered by:Out 1 :Machines | Internal | Status | RecordingControl of the Record Red light.Out 4 :Mixer | 1 (Strip 1 - Mono) | Gain Bus 1 | GainFader start of the first mixer fader. For dB value the threshold is -90 dBOut 5 :Mixer | 2 (Strip 2 - Mono) | Gain Bus 1 | GainFader start of the second mixer fader. For dB value the threshold is -90 dBOut 6 :Mixer | Mute Bus 1 | Reset SoloControl of an additional indicator in the mixer room when a mixer strip is soloed.GPIO Controller Configuration dialogGPI / GPO Control : GPI / GPO Support 23 - 398