V6 User Manual 1.00.book - Studio General

Playback Lookahead BufferSets the length of audio that will be pre-loaded into buffers prior to playback. Four levels are available in the dropdownlist:• Level 1 (0.341 [s])• Level 2 (0.682 [s])• Level 3 (1.36 [s]): Default• Level 4 (2.72 [s]The default value is Level 3). A larger value may enable you to playback certain large projects. For example it canimprove track count with one file per track BWF on some projects. This value should be increased gradually untilbehavior is as you wish.Note: The higher the Level the longer the PreLoad Buffer will be. The longer the PreloadBuffer the greater the Memory consumption.Note: The higher the PreLoad level the longer the Playback Cursor will pause beforeplayback commences.The current Buffer Level is shown in the Pyramix Info bar during normal operation:Record Block SizeOffers a choice of four possible values. Should be left at the default 64kB in most circumstances.Automatic Deglitching (Removes glitches at start / end of Clips)When Enable is checked, a short fade is applied to the start and end of every clip. Ramp Length sets the fadeduration.Auto-MonitoringToggles between two options:European Monitoring (All tracks turn to INPUT on stop) (default) orUS Monitoring (Only Record Ready tracks turn to INPUT on stop)Real-time Sampling Rate ConversionToggles between three options:Disabled No Real-time SRC will take place. Clips will be played back at the original sampling rate. I.e. if samplingrate does not match Project sampling rate then the Clips will be played back at incorrect speed.Medium Quality Clips will be played back at the correct speed. Conversion, if necessary, will be carried out at acompromise quality between speed and quality.Settings : Application 27 - 523