V6 User Manual 1.00.book - Studio General

Jog Wheel SettingsPresetThe combo box offers a choice of hardware controller presets including the Merging Technologies Ramses MSCand ISIS. Choose your controller from the list or, if not shown User DefinedAuto Jog on moveWhen ticked moving the jog-wheel enters Jog mode. When Auto-Jog is enabled, all Jog Commands are processeda slightly different way. Pyramix temporarily stops chasing and starts Jogging while sending Goto commandsto the External Machine. The audio is therefore perfectly scrubbed and the external machine follows theaudio as well as it possibly can. When the user stops Jogging, Pyramix automatically returns to chase mode.Jog Speed ceilingSets the maximum jog speed from a choice of 1X, 2X, 4X or 8X play speedFlywheel inertiaLow follows the actual movements as sent by the jog wheel. High passes the actual movement through asmoothing filter. So, when the slider is set to Low the Smoothing Filter parameters have no effect.For sound to picture work where tight sync to picture is required use a setting biased to Low. For a more pronouncedflywheel effect choose a Higher setting.The Middle position is a good starting point.Transient response acceleratorOptimizes Pyramix’s reactivity to jog moves, settings range from Smooth to Accurate.When the slider approaches Accurate there may be some strange undesirable effects.Smoothing FilterThe Smoothing Filter parameter determines the length of the “fade in” and “fade out” when beginning and endingscrubbing. Enter the required value in the box expressed in video frames.Jog - sensitivity [ ] second(s) per revolutionSets the time moved in one revolution of the jog wheel. Type the required value in the box.Shuttle - sensitivity [ ] revolution(s) for nominal speedSets the fraction of a revolution or number of revolutions required to maintain nominal speed. E.g. an entry of 0.25will require a quarter of a turn clockwise to achieve nominal speed.Navigate - sensitivity [ ] revolution(s) to traverse the timelineNavigate is silent jog mode. Sets the number of revolutions of the jog wheel required to traverse the visible timeline.I.e. the actual speed varies with the zoom setting.Fine Jog sensitivity factor [ ]Sets the fraction of the regular Jog Sensitivity Setting that will be invoked when Fine Jog is selected in theMachines > Controllers menuMouse Scrubbing SettingsGives a choice between Analog Tape Mode with two options or Repeat Loop ModeSettings : Application 27 - 526