V6 User Manual 1.00.book - Studio General

Right-clicking on an installed plug-in pops-up a context menu, for example:Effect context popupInsert before (effect clicked on) > drops down a list of effects of the same type that can be inserted before current theeffect.Replace (effect clicked on)> drops down a list of effects of the same type that can replace the current effect. Double-Clickingan installed effect does the same thing.Remove (effect clicked on) Uninstalls the current effect from the Strip or BusMove ( VS3 Effect clicked on) to another stemPops up a dialog with all available stems for this bus. (Only present when the Effect is in aMulti-Stem Bus) The Iteration and Stem numbers are then shown on the Effect:Thus 1-3 means Iteration 1 on Stem 3Copy Selected (Effect type) Effects to selected strips As it says. Target strips can be selected before or after selecting theeffect(s)Copy Selected (Effect type) to All Strips As it says.Remove All (Effect type) Effects Removes all effect of the current type clicked on from the Strip.Remove All EffectsRemoves all effects of all types from the current Strip.Copy All Effects to All Strips Copies all the effects installed in the current Strip to all other Strips.Copy All Effects to Selected Strips Copies all the effects installed in the current Strip to all selected Strips.External Effects InsertsExternal Inserts are added in the same way as VS3 Effects. Click on Click to Add and choose Other > ExternalInsertMixer : Configure Page 10 - 152