V6 User Manual 1.00.book - Studio General

Markers LinkingThe Markers Linking drop-down list menu is at the top of the Markers Tab Window.Markers Linking drop-down list menuThe selection made here determines the behavior of markers when tracks are edited.Markers Independent (markers are locked to the scale)Linked to Any Track (markers follow any track operation)Linked to Tracks without Group (markers follow any track that is not a member of a group)Linked to ‘Effects’, ‘Music’, ‘Foley’ etc. (markers follow any track of groups listed here)Jog / ShuttleJog SettingsScrub Using the Middle Mouse ButtonAudio can be scrubbed by holding down the middle mouse button while the cursor is in the Timescale area andmoving the cursor left to scrub in reverse or right to scrub forward. The distance moved away from the currentplay cursor position will determine the relative playback speed. When the play cursor reaches the current mousepointer position, or the middle mouse button is released, playback will stop.ShuttleThe transport can be shuttled with audio output at up to 8 times speed.Jog / Scrub parameters are set in Settings > All Settings > Application > Jog / Chase.Auto Jog on moveIf a physical controller with a Jog/Shuttle wheel is available and this box is checked, then moving the jog wheelwill automatically enter Jog mode.Auto-Solo SelectionWhen checked the selected track or tracks are automatically soloed when in Jog mode.Speed ceilingFour Radio Buttons offer the choice of 1X, 2X, 4X or 8X nominal play speed.SensitivityThe value typed in the box (in seconds) determines the number of seconds the transport will move per revolutionof an attached physical jog wheel.Smoothing FilterThe value typed in the box (in video frames) determines the degree of smoothing that will be applied.Flywheel InertiaThe slider varies the flywheel effect when jogging.Transient response acceleratorTransport and Navigation : Jog / Shuttle 6 - 95