V6 User Manual 1.00.book - Studio General

# (Number)Number of the Track. Click on the Value to display a drop-down list with all available track position numbers, thenyou can select a new location for the track (E.g. Send track 9 to 2).PausePause of the CD Track: Time between the start of the track and the stop of the previous one. The pause of the firsttrack is always 0 (the 2 second pause required by the RED Book standard are automatically added for you in thefinal TOC) except in case of a Ghost track (see the Ghost Track section for more detail).StartStart of the CD Track in the Timeline. Modify this value to ripple the track and all the tracks after.EndStop of the CD Track in the Timeline. Modify this value to ripple all the tracks after (performs a similar function toLength).LengthLength of the CD Track. Modify this value to increase or decrease the length of the track and ripple all the tracksafter.Start OffsetNegative Offset for the start marker of the track.Use OffsetEnable or disable the offsets of the track (start, stop, and index). To individually apply offset to start, stop andindex, go the All Markers page in the left-hand panel.ISRCInternational Standard Recording Code. See the CD Properties section in the left-hand panel to get a completedescription of this code. See the Extra Functions section to see how to automatically create this code. This fieldhas a validation routine. The code may be entered as you wish and will automatically be validated. (E.g. “(FR) W01 -02 / 1” gives “FRW010200001”).CopyToggles the Copy Protection bit.CommentGeneral purpose comment. For ‘in house notes’.CD Text fieldsAll the remaining fields can be copied from the CD Properties page, see the Extra functions section, after this:CD Text TitleCD Text PerformerCD Text Song WriterCD Text ComposerCD Text ArrangerCD/SACD Tab Window MenusDiscsDeleteCutCopyCD/SACD Mastering : CD/SACD Tab Window Menus 24 - 405