V6 User Manual 1.00.book - Studio General

3. Also in the Target section, click on the Settings... button to open the CD-R Settings dialog box. Set these asdesired for the CD-R burning session. The default settings will usually be fine but it is worth checking that theCD Write Method: entry is set to Disc At Once.DDP Masters4. When all CD-R settings are adjusted as needed, click the Record button in the Target section to begin burningthe CD-R.Note: As in the above example, Pyramix allows you to specify burning your DDP to afolder (instead of an Exabyte tape) and from there on it may be transferred, copied,duplicated, checked, archived or whatever else you want to do with it, such as sending itover a secure FTP connection.Red Book Compatible MastersCD CopyDiscWrite General and Advanced SettingsIf the CD-R is to be used as a “Red Book” compatible master "Contiguous" MUST be selected.Where suitable hardware is available, a CD may be directly copied by selecting a CD-ROM drive as the source and aCD-R/RW drive as the destination.TOCsPrint TOC... prints the current TOC in the currently selected report format.Save TOC... opens a file save dialog to save the current TOC as a text (.txt) file.Select Report... opens a file open dialog. Any previously designed TOC report format (*.lst) may be loaded.CD/SACD Mastering : DiscWrite 24 - 422