V6 User Manual 1.00.book - Studio General

Note: When IP:Off is displayed in the Aux Send master strip I.e. no In-Place source isselected, then the IP buttons in the input strips will be grayed out. Similarly, when an In-Place source IS selected and the yellow IP button in the input strip is lit then the staticrouting grid is grayed out and unavailable as in this illustration.Strip Aux sends and Channel Routing dialogThe three strips shown are 10, 11, and 12. Since the IP button is selected (Yellow) on strips 10 and 11 the staticrouting grid is grayed out and thus unavailable. On strip 12 the IP button is deselected (dark) and the Static ChannelRouting grid can be opened by clicking on the grid button next to the knob.Note: The IP button defaults to On when the aux send is first turned on. If the send issubsequently turned Off (muted) then the current setting of the IP button is rememberedwhen it is unmuted.Mixer : Mixer Components 10 - 170