V6 User Manual 1.00.book - Studio General

output assignment to a different Mixer channel will also change the Input to the input selected on the strip. If theInput assignment is changed in the Track Header, this change is reflected in the strip and vice-versa.When Track inputs and outputs are not assigned, the corresponding boxes for that Track will have dashes in theminstead of numbers.Multiple tracks can be assigned to the same Mixer channel. They are therefore sub-mixed before entering theMixer. This allows more tracks to be played than the number of Mixer channels.Many tracks can be fed from the same physical input.Track Header ComponentsThe large, bold number is the Track number. All tracks including Virtual Tracks are numberedin ascending order as they appear on screen.The pale green box shows the number of the Mixer Strip Channel its output is assigned to.Clicking this icon pops up a list to select from all available Mixer Strip Channels. If the palegreen box shows a dash, no Mixer Strip Channel is selected and recording and or replay isnot possible.If the pale green block shows a second number, letter or letters tag in addition to the number,the Mixer Strip is a multichannel type and the letter(s) indicate which channel the track isassigned to. (In this case, Strip 8 LfeInput source - the number shows the selected record input. When this area shows a dash norecord input is selected. This can be also set directly in the Mixer Console window.Clicking the Track Name area opens a text entry box where the track name can be typed.Track names default to Mono, Stereo or Audio.View Automation Off - Automation data overlay is not displayed on the track.View Automation On - Automation data overlay is displayed on the track.Right clicking the automation icon pops up the Automation Overlay context menu with options as to what is displayed.The Mute icon toggles the Track Output between Un-Muted, as shown here;and Track Output Muted, as shown here.The Solo icon toggles the Track Output between Solo off, as shown here and;Solo on as shown here.The Record icon has three possible states.Record Safe and Record Ready are toggled by left-clicking the icon. AutoPunch Ready is enabled / disabled byholding down the ALT key while left-clicking the icon.Record Safe - no recording possible.Tracks and Track Groups : Track Header Panel 5 - 75