V6 User Manual 1.00.book - Studio General

Aux Send Buses:General Purpose Aux Send buses provide a way to create ‘auxiliary’ mixes which are normally used to provideheadphone or cue mixes for musicians, or to send signals to effects such as reverbs, delays, choruses, etc.SubGroup BusesSubGroups are a special type of Aux bus which are automatically routed to buses,in exactly the same way as normal input strips, instead of having output connections.SubGroup buses offer a quicker and more efficient means of managingeffects channels (e.g. for Reverb plug-ins or any VST/VS3 plug-in used as Send FX).When using SubGroups there is no longer any necessity to have additional correspondingreturn strips. In addition, this also enables the use of post-fader effects.Hover over the strip pop-up and select from the list:SubGroups have Mute, Solo Safe and PF, Pre-Fader metering, buttons like inputstrips and Repro buttons and In Place options like Aux Send buses.Note: Please be aware that a SubGroup Bus will auto-take InternalBus connection resources, starting from the last one. E.g. IB64-IB63 for the first two SubGroup Channels added to a Mixer. Thismeans that you will no longer see IB63 and IB64 in the IB list.Aux Send Bus ChannelsAux Send Buses can have from 1 to 8 channels. Channels have a custom type thatcan be manually set in the Configuration Page to:• Left (L)• Center (C)• Right (R)• Surround Left (Ls)• Surround Right (Rs)• LFE (Lfe)• Left Center (Lc)• Right Center (Rc)Mixer : Mixer Components 10 - 165