V6 User Manual 1.00.book - Studio General

Composition Information and Settings Toolbar.Composition Information and Settings ToolbarAbove the Time Scale Bar(s) and below the Project Editing Panel Toolbar(s) is the TimeCode Toolbar. This containsa number of Icons and TimeCode register boxes with increment / decrement arrows. From left to right theseare;Playhead Cursor - current positionMark InMark OutMark In to Mark OutSelection InSelection OutSelection In to OutAll the registers accept direct keyboard entry of TimeCode.When values are typed into the Mark In to Mark Out or Selection In to Selection Out registers, the In valueremains fixed while the Out is adjusted.Clicking on the icons beside the registers changes the view of the Composition in the Timeline as follows;Clicking Cursor moves the view of the Timeline to the current Cursor position with the Cursor in the center ofthe track display. Similarly, clicking on the Mark In, Mark Out, Selection In or Selection Out buttons centres thedisplay on the current Mark In, Mark Out, Selection In or Selection Out marker positions. Clicking on the MarkIn to Mark Out or Selection In to Selection Out icons centres the display on the area between the Mark In andMark Out or the selected area, changing the zoom factor to make the area almost fill the track display.Transport and Navigation : Navigation 6 - 93