11.07.2015 Views

V6 User Manual 1.00.book - Studio General

V6 User Manual 1.00.book - Studio General

V6 User Manual 1.00.book - Studio General

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Record Ready - Recording commences when the transport Master Record button is pressedand finishes either when the Stop button is pressed, or when the Play button is pressed.Autopunch Ready - Recording commences when the previously set Record In point isreached and finishes when the previously set Record Out point is reached.Right-clicking the Record icon opens the Settings Window with the Project > Record page selected.The Monitor icon also has three possible states.Note: These icons are only active when both an input and output connected.These are toggled by left clicking the icon.Auto - monitoring switches the associated Mixer channel input automatically between inputand repro. Behavior depends on the Auto-monitoring section setting in the Settings > AllSettings > Application > Playback/Record page. European Monitoring (All tracks turn toINPUT on stop) OR US Monitoring (Only Record Ready tracks turn to INPUT on stop)Repro - The associated Mixer channel is always fed from the track replay.Input - The associated Mixer channel is always fed from the track’s selected Input source.Expand Track Group - Grayed out unless track is member of a Group.Collapse Track Group - Alternate state of Expand Track Group Only visible when the trackis a member of a Group.The Waveform icon has three possible states.Display Waveform - by default shows clips as orange blocks with white waveform superimposed.Display Blocks - by default shows clips as orange blocks without waveform.Display Envelope - by default shows clips as orange blocks with white waveform and adds ablack line which allows the gain to be adjusted using the mouse by simply clicking and dragging.Pressing the Ctrl key enables the drawing tool for envelopes. This also applies to Automationcurves.Peak Meter - If the Peak Meter is visible on the far right of the Track Header, clicking on ithides it. If not visible, clicking in the space where it should be unhides it.Always Visible offAlways Visible on. When this button is pressed the track will be kept in view on the Timelinewhenever possible.Playlist opens this menuTracks and Track Groups : Track Header Panel 5 - 76

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!