V6 User Manual 1.00.book - Studio General

XDTDM Routing > PCM I/O routing or PCM-HSR I/O Routing if using XDTDM mode.DXD Projects I/O Routing if you wish to use Internal Return Buses in a DXD Project.The number of Internal Return Buses can be set using the Internal Buses combo box. Click on the OK button tomemorize the setting and exit.The number of Internal Return Buses you assign here will be available as possible channel strip sources in themixer.Mixer Delay CompensationSummaryMixer Delay Compensation offers a choice between:Full Delay Compensation (including effects)All but effects latenciesOffThis choice is made in the All Settings > Project > Mixer > Mixer Settings page along with a switch to turn AutomaticCompensation on or off and a slider to set the Maximum Mixer Delay Compensation.Delay Compensation SwitchingAs detailed above, Compensation can be selected in the All Settings menu. It can also be toggled On/Off in theMixer context menu. Right click and select Settings then click on Enable Delay Compensation to toggle On orOff.Note: The Full Delay Compensation / All but effects latencies setting is retained whenCompensation is switched on and off from the mixer window.With Mixer Delay Compensation turned On and All but effects latencies selected:1. Input strip set as a (normal) Input: no compensation. If a Delay is applied manually the output signal of thisstrip will be delayed by the applied value.2. Input strip used as an Aux or Bus return, i.e. patched to an Internal Bus and set as an Aux or bus return (seeInput Strip Mode on page 179): all other Output Strips are automatically delayed by the amount equal tothe Bus internal processing delay.3. Input strip used as an External Aux or Bus return, i.e. where the Aux or bus signal is sent outside the workstationand returned to a physical Input: All other Strips are automatically delayed by the amount equal to theBus internal processing delay providing the Input is set as an Aux or Bus (see Input Strip Mode onpage 179). If a Delay is applied manually, for example to compensate for the delay in an external processor,the signal of all other output strips will be further delayed, according to the value entered.When Full Delay Compensation is selected, Plug-in effects that correctly report their latency will also have theirdelay compensated. Further, this delay will be maintained when the plug-in is in bypass mode.Please see also Mixer Settings on page 516Mixer : Mixer Delay Compensation 10 - 177