V6 User Manual 1.00.book - Studio General

The Loop Play toggle button puts Pyramix into a loop play mode, which continuously playsthrough from beginning to end of the current selection.The Freeze button stops all External Machines where they are. See Freeze Mode below.Edit/Record In/OutSets the Internal Machine (Pyramix) as the Active Machine. See Active Machine below.Set In and Set Out enter the current machine position in the adjacent registers.TimeCode values can also be typed directly or adjusted using the increment/decrement buttons in the Panel Registers.GoTo in and GoTo out locate the machine to the In and Out points respectively.The In and Out points set for the Internal Machine are the main, red In and green Out, marker positions in thePyramix TimeLine.External Machine panel - FeaturesTransport ControlsThe Rewind button moves the External Machine at an accelerated speed backwards.The - 1 Frame button nudges the External Machine backwards one frame per press.The Play button starts the External Machine in Play mode.The + 1 Frame button nudges the External Machine forwards one frame per press.The Fast Forward button moves the External Machine at an accelerated speed forwards.The Stop button sends a Stop command to the External Machine.Pops up the Goto Timecode dialog. See above in Internal / External Machine panels -Common FeaturesSets the External Machine as the Active Machine. See Active Machine below.Machine Control : Transport Control Panel 21 - 385