V6 User Manual 1.00.book - Studio General

This module is initially aimed at performing ±0.1 % pull-up / pull- down audio conversions, but there are severalpossible ways of defining the ratio between the destination length and the final length (frame rates, sample rates,pitch and ratio in percent).The process differs from a Time Stretch operation since the pitch is modified. The Input and Output files have thesame sampling rate but the length of the output files will be: (initial length) x (displayed ratio).Another setting, Quality, has an effect on the resolution of the oversampling process of the treatment.This module is available, like MPEX, in the 'Quick convert' list of the Media Manager, the Project menu (to processall the media in a project), and as a 'Surround Encoder' (Project > Surround Processing).The following graph gives an indication of the effect of the three Quality settings on THD & Noise.:Samplerate Converter PropertiesResampler quality setting effect on THD & NoiseSamplerate Converter Properties dialogMedia Management : Tools and Menus 4 - 56