V6 User Manual 1.00.book - Studio General

More documents

Recommendations

Info

Single RowSingle row is useful if you only wish to display buses and or Externals (returns).Meter Bridge - Single Row ModeStripsThe red button shows/hides the Input Strip Meters (default is Show)Note: Show/Hide for Input Strips is only available in ‘single row’ display mode. Useful inapplications where the Bus and External Machines are of more interest than the Inputs.Pre-FaderWhen lit, the Input Meters source is taken pre-fader. (default is post-fader)AutomationWhen lit, four Fader Automation Mode indicators are shown in each Input Strip. (default is hidden)Auto-select Active StripWhen lit, the active strip is highlighted in yellowBusesThe red button shows/hides the Bus Strip Meters (default is Show)Pre-FaderWhen lit, the Buses Meters source is taken pre-fader. (default is post-fader)ExternalsThe red button shows/hides the External Machines Meters (default is Show)Note: Externals, External machine Returns, are set up in the Monitor : Externals page.Please see: External Inputs on page 205Meters ZoomThe slider adjusts the meter scaling. Range is from 0dB to -144.5dB maximum to 0dB to -10dB minimum. Doubleclickingon the slider ‘knob’ resets to default scaling.Meter Bridge : Meter Bridge 12 - 218
Meters TypeThe drop-down offers a choice between Peak (default), VU or Peak + VU as seen here along with the AutomationIndicators:Meter Bridge - Triple Row ModeMeter Bridge : Meter Bridge 12 - 219
Page 2:
No part of this documentation may b
Page 7 and 8:
8 Editing 110Editing in the Timelin
Page 9 and 10:
11 Monitor 196Monitor ! Window 197S
Page 11 and 12:
15 Strip and Bus Tools 275Strip and
Page 14 and 15:
Ramses MSC 390Hardware Control Surf
Page 16 and 17:
ADR 474Machines 474Macros 479Settin
Page 18 and 19:
Internal Bussing & I/O Capabilities
Page 20 and 21:
Thank you!Congratulations on your p
Page 22 and 23:
• Full Delay Compensation (VS3 an
Page 24 and 25:
Pyramix Virtual Studio OverviewPyra
Page 26 and 27:
DSP(Mykerinos DSP Systems) or Core
Page 28 and 29:
The default X-fade can be modified
Page 30 and 31:
OverviewMassCore is an extremely po
Page 32 and 33:
Core Load IndicatorsIn MassCore bas
Page 34 and 35:
Note: These bars should be ignored
Page 36 and 37:
OverviewEditing ProjectProjects are
Page 38 and 39:
10. Click Next. The New Project Wiz
Page 40 and 41:
HousekeepingAudition PlayMedia Fold
Page 42 and 43:
N.B. In Pyramix User Libraries, the
Page 44 and 45:
• A list of Pyramix Projects and/
Page 46 and 47:
The left hand pane shows Libraries
Page 48 and 49:
Library MenusThe Edit, View and Tri
Page 50 and 51:
Consolidate(Libraries only) Opens t
Page 52 and 53:
OptionsOpens the Library Settings d
Page 54 and 55:
Quick ExportEnables Pyramix Master
Page 56 and 57:
This module is initially aimed at p
Page 58 and 59:
TimeZone Properties - BasicScaling
Page 60 and 61:
When checked, the level of the high
Page 62 and 63:
Managing Media FoldersChoose a medi
Page 64 and 65:
The Mounting Rules dialog can be fo
Page 66 and 67:
This will open a browser Window:Nav
Page 68 and 69:
Using Offline/Reference LibrariesWh
Page 70 and 71:
TracksAdding TracksEach Project has
Page 72 and 73:
Other types of strip can be selecte
Page 74 and 75:
Multiple tracksYou can also delete
Page 76 and 77:
Record Ready - Recording commences
Page 78 and 79:
Tracks Tab WindowThe Track Tab Wind
Page 80 and 81:
If YES the automation envelope is d
Page 82 and 83:
The rest of the fieldsAll the other
Page 84 and 85:
Transport and Navigationwww.merging
Page 86 and 87:
Clicking on the arrow opens a sub-m
Page 88 and 89:
• Frames• Samples• [ms]• CD
Page 90 and 91:
Bars & Beats Scale BarAs with the o
Page 92 and 93:
value of 24.0 results in a Tempo of
Page 94 and 95:
MarkersMarkers are shown in a Marke
Page 96 and 97:
The slider varies the jog response
Page 98 and 99:
Transport Control PanelPressing the
Page 100 and 101:
The OverviewOverview Tab WindowThe
Page 102 and 103:
Getting Audio into Pyramix Virtual
Page 104 and 105:
Record Punch In (Auto)After Recordi
Page 106 and 107:
3. Selecting Properties opens the S
Page 108 and 109:
Manual DigitizingAutoconforming1. I
Page 110 and 111:
Editingwww.merging.com/PyramixUSER
Page 112 and 113:
Anatomy of a ClipMany Edit Commands
Page 114 and 115:
Clip and Selection EditingMaster Cl
Page 116 and 117:
Clips Rename open the Rename Clips
Page 118 and 119:
TracksShows the tracks the media wa
Page 120 and 121:
the Track on which you right-clicke
Page 122 and 123:
Editing ModesThe current Editing Mo
Page 124 and 125:
Tim Fade InTrim Fade In Symmetrical
Page 126 and 127:
Delete and RippleCut and RipplePast
Page 128 and 129:
Normalize Example:In this case with
Page 130 and 131:
list shows information concerning t
Page 132 and 133:
Source - Destination EditingConcept
Page 134 and 135:
The menu item Edit > Source - Desti
Page 136 and 137:
Fade Editorwww.merging.com/PyramixU
Page 138 and 139:
Select/Edit Next FadeZoom around th
Page 140 and 141:
• When the Force Safe box is chec
Page 142 and 143:
Save X FadeThe dialog box opens wit
Page 144 and 145:
Mixerwww.merging.com/PyramixUSER MA
Page 146 and 147:
Configure PageMixer Configure PageI
Page 148 and 149:
Strip and Bus operationsOnce select
Page 150 and 151:
Effect ManagementClicking on Effect
Page 152 and 153:
Right-clicking on an installed plug
Page 154 and 155:
Wizard...Opens the Configuration Wi
Page 156 and 157:
Mix !Basic MixerAutomatic Delay Com
Page 158 and 159:
ColorsBus paths can be colored to a
Page 160 and 161:
Mixer ComponentsInput StripsMixer I
Page 162 and 163:
Multiple Mix Buses (Stems)Mono / St
Page 164 and 165:
Channel Direct OutputsAll input str
Page 166 and 167:
• Surround Center (Cs)By Default
Page 168 and 169: Aux Send RoutingWhen a Strip feedin
Page 170 and 171: Note: When IP:Off is displayed in t
Page 172 and 173: Stereo PannersPyramix offers a comp
Page 174 and 175: M&S Stereo StripsWhat is M&S?M&S st
Page 176 and 177: Checking the Connect automatically
Page 178 and 179: Delay CompensationDelay Compensatio
Page 180 and 181: When the Input Strip Mode is set to
Page 182 and 183: utton indicates that the effect is
Page 184 and 185: Ghost Effects and Plug-insEssential
Page 186 and 187: External InsertTo add an External I
Page 188 and 189: Show DistributionWhen checked, a na
Page 190 and 191: Saving / Loading Mixer PresetsMixer
Page 192 and 193: Level MeterToggles the main display
Page 194 and 195: Mixer Peak Log WindowClick on Show
Page 196 and 197: Monitorwww.merging.com/PyramixUSER
Page 198 and 199: Note: At bottom left in the screens
Page 200 and 201: A Main grid: this matrix defines th
Page 202 and 203: CommandsTo set the Reference Volume
Page 204 and 205: Media Manager MonitoringNote: In or
Page 206 and 207: Note: Talkback is currently availab
Page 208 and 209: Note: If a seperate ‘Producer’
Page 210 and 211: 9. Add two more sources and label t
Page 212 and 213: OperationThe smaller buttons vertic
Page 214 and 215: Meter Bridgewww.merging.com/Pyramix
Page 216 and 217: Meter Bridge WindowBy default the M
Page 220 and 221: Automation Fader Mode and Group Ind
Page 222 and 223: Effects and Plug-insThis chapter de
Page 224 and 225: Channel Combo BoxShows which channe
Page 226 and 227: Effects AutomationRight-clicking ov
Page 228 and 229: The Low LPF is a shelving EQ with a
Page 230 and 231: The legend for this display is as f
Page 232 and 233: MS EncoderAs it says on the tin.Eit
Page 234 and 235: Mastering Peak/Vu MetersPeak VU Bot
Page 236 and 237: VU-Meter controlsVu-Meter Controls
Page 238 and 239: This parameter sets the level of th
Page 240 and 241: In the specific case of a DSD sessi
Page 242 and 243: Surround MeterGives a very useful i
Page 244 and 245: Integration (ms)Sets the Integratio
Page 246 and 247: Merging TechnologiesEQ-XEQ-X floati
Page 248 and 249: FluxSolera +Solera + is the flag sh
Page 250 and 251: PureNotes DenoiserPureNotes Denoise
Page 252 and 253: Frequencies AnalyzerStereo Oscillos
Page 254 and 255: Prosoniq MPEX3 dialogA comprehensiv
Page 256 and 257: VST ScannerTo Load VST plug-ins in
Page 258 and 259: VST Plug-in AutomationVST plug-in a
Page 260 and 261: Direct X Plug-insin Pyramix V6.1, D
Page 262 and 263: Automationwww.merging.com/PyramixUS
Page 264 and 265: Dynamic Automation ModesEvery contr
Page 266 and 267: Selecting one of these opens a sub-
Page 268 and 269:
Unwritten TrackIf the track does no
Page 270 and 271:
Values can be increase by simply ty
Page 272 and 273:
Editing Automation dataAutomation d
Page 274 and 275:
Automation in editing and libraries
Page 276 and 277:
Strip and Bus ToolsEq, Comp/Limiter
Page 278 and 279:
Input SectionColor bar indicates Se
Page 280 and 281:
De-Compress SwitchSwitches the comp
Page 282 and 283:
This small window displays the sett
Page 284 and 285:
If two or more Bus Tools are insert
Page 286 and 287:
Main and Input Level SectionStrip N
Page 288 and 289:
Automation mode switchesPlease see:
Page 290 and 291:
Pre-Anticipation (Lookahead delay)
Page 292 and 293:
DitherWhenever changes are made to
Page 294 and 295:
3. In the Record section, choose to
Page 296 and 297:
To allow for limited further editin
Page 298 and 299:
SourceOffers a mutually exclusive c
Page 300 and 301:
Glitch DetectorFinds Glitches and P
Page 302 and 303:
The + and - buttons zoom in and out
Page 304 and 305:
File Interchange - FormatsFileForma
Page 306 and 307:
leaving in blocks of typically 64 k
Page 308 and 309:
Mounting RulesIn addition to the ge
Page 310 and 311:
Project InterchangeInterchangeForma
Page 312 and 313:
ImportProject > Import opens this w
Page 314 and 315:
AAFPyramix can import and export pr
Page 316 and 317:
Navigate to the required drive/fold
Page 318 and 319:
AKAI DD/DRPyramix is capable of rec
Page 320 and 321:
SettingsSettings pops up a dialog b
Page 322 and 323:
Keep open keeps the CD Import windo
Page 324 and 325:
ScopeThe following items are import
Page 326 and 327:
ProToolsNote: Please see also: the
Page 328 and 329:
Cancel aborts the import operation.
Page 330 and 331:
Adds a graphic preview of the Cue-S
Page 332 and 333:
Customizing the User InterfacePyram
Page 334 and 335:
Customizing Keyboard ShortcutsWe st
Page 336 and 337:
User MacrosMacros are sequences of
Page 338 and 339:
Project TemplatesPyramix provides t
Page 340 and 341:
Player/Recorder ModeMultitrack Edit
Page 342 and 343:
Launch the Virtual Tape Format appl
Page 344 and 345:
View > Scales / Toolbars and clicki
Page 346 and 347:
keeps track of the proper naming, m
Page 348 and 349:
Mix/Editing for TV shot in NTSC and
Page 350 and 351:
Conforming and Reconformingwww.merg
Page 352 and 353:
The CMX EDL Import Options main dia
Page 354 and 355:
Any errors encountered while parsin
Page 356 and 357:
Opens the Reconform... dialog:This
Page 358 and 359:
Step 2Pyramix automatically conform
Page 360 and 361:
Step 2Select Project > Import and c
Page 362 and 363:
Step 3Repeat Step2 with the same op
Page 364 and 365:
Step 6The Pyramix Project has now b
Page 366 and 367:
Step 8The Video Reference Tracks (w
Page 368 and 369:
Pyramix Version 1 Project with Audi
Page 370 and 371:
Step 3The new video file, Version 2
Page 372 and 373:
A file Open Browser Window opens:Py
Page 374 and 375:
Step 5Pyramix automatically conform
Page 376 and 377:
Relink to New MediaOpens a dialog o
Page 378 and 379:
Machine Controlwww.merging.com/Pyra
Page 380 and 381:
Linking Functions of External and I
Page 382 and 383:
Internal / External Machine panels
Page 384 and 385:
LocatePressing theLocate button pop
Page 386 and 387:
Record and Edit controlsThe first f
Page 388 and 389:
Examples:Jog Wheel ModeThe buttons
Page 390 and 391:
ScopePyramix can control and be con
Page 392 and 393:
Then select: Pyramix : Download : D
Page 394 and 395:
OASIS ProtocolOASIS is a generic TC
Page 396 and 397:
GPI / GPO Controlwww.merging.com/Py
Page 398 and 399:
Output pin just drag the Remote ont
Page 400 and 401:
CD/SACD Masteringwww.merging.com/Py
Page 402 and 403:
Simply right-click on a selection o
Page 404 and 405:
(Read only) Number of the PQ Marker
Page 406 and 407:
PasteCopy InfoPaste InfoValidate PQ
Page 408 and 409:
CD Offset default parametersThese p
Page 410 and 411:
Track Clicking on the third from th
Page 412 and 413:
Exporting Projects to CD Image File
Page 414 and 415:
Mixer SourcesPick two appropriate b
Page 416 and 417:
Audio CD Cue Sheet CompatibilityTes
Page 418 and 419:
Source - Pyramix CD ImageDiscWrite
Page 420 and 421:
CD-R/CD-RWWhen a CD-R(RW) is the se
Page 422 and 423:
3. Also in the Target section, clic
Page 424 and 425:
Procedure1. Before launching DiscWr
Page 426 and 427:
Note: Detailed connection diagrams
Page 428 and 429:
Productivitywww.merging.com/Pyramix
Page 430 and 431:
Simply launch the Waveform Generato
Page 432 and 433:
Note: The centre button is only ava
Page 434 and 435:
Overview Tab Window in place above
Page 436 and 437:
The All Settings > Timeline Layout
Page 438 and 439:
of say 64 inputs by 64 outputs with
Page 440 and 441:
Allocating DSPDSP allocation is set
Page 442 and 443:
MassCore DSP AllocationNote: MassCo
Page 444 and 445:
Menuswww.merging.com/PyramixUSER MA
Page 446 and 447:
CloseImport...Export...Save as Vers
Page 448 and 449:
Undo clip(s) moveUndo history >Redo
Page 450 and 451:
First select the Clip or group of C
Page 452 and 453:
View MenuView menuFixed Cursor whil
Page 454 and 455:
Tracks >Zoom 4 Recall Preset Zoom 4
Page 456 and 457:
Show all TabsShows all Tabs in dock
Page 458 and 459:
Nudge to Next EditNudges the select
Page 460 and 461:
Starting Numbering at:Items Separat
Page 462 and 463:
Synchronize Tracks & StripsThe audi
Page 464 and 465:
Nudge Cursor to Previous ClipNudge
Page 466 and 467:
Prompt for Marker Name at insertion
Page 468 and 469:
Select Clip(s) under Cursor Selects
Page 470 and 471:
Audition Out with CurveAudition Out
Page 472 and 473:
AutomationAutomation menuAutomation
Page 474 and 475:
ADRFor details of the ADR Menu plea
Page 476 and 477:
EndPunch >EndPunch SelectionPunch S
Page 478 and 479:
Fast RewindScan ForwardScan RewindS
Page 480 and 481:
HelpHelp menuThe Help Menu gives qu
Page 482 and 483:
OverviewPyramix is massively config
Page 484 and 485:
HardwareFormats and SyncAll Setting
Page 486 and 487:
MasterIn a multi-board system, this
Page 488 and 489:
MassCoreNote: The MassCore mode is
Page 490 and 491:
ADAT Board SettingsNote: These sett
Page 492 and 493:
Sampling Rate ConvertersGrayed out
Page 494 and 495:
Mic/Line On inputs 1 and 2 you can
Page 496 and 497:
SDIF Board SettingsI/O InterfaceInp
Page 498 and 499:
HDTDM / XDTDM / MassCore RoutingThe
Page 500 and 501:
XDTDM RoutingAll Settings Hardware
Page 502 and 503:
Manual RoutingDouble-clicking the f
Page 504 and 505:
the optional Video/TC interface. To
Page 506 and 507:
ProjectGeneralThe General Page has
Page 508 and 509:
Prefix with Track NameWhen checked
Page 510 and 511:
If Wave is chosen as the Format the
Page 512 and 513:
This mode makes Pyramix work like a
Page 514 and 515:
Peak and Overload Hold TimeSets the
Page 516 and 517:
Mixer SettingsStereo Pan LawThe dro
Page 518 and 519:
ApplicationGeneralPlatformAudio pro
Page 520 and 521:
Displays and sets the alternative l
Page 522 and 523:
Playback/RecordAll Settings Applica
Page 524 and 525:
Jog/ChaseHigh Quality Clips will be
Page 526 and 527:
Jog Wheel SettingsPresetThe combo b
Page 528 and 529:
CD/SACDAll Settings Application CD/
Page 530 and 531:
TimeLine layoutFor all the color op
Page 532 and 533:
Track Headers LayoutAll Settings Ap
Page 534 and 535:
LocationAll Settings Application Lo
Page 536 and 537:
where no previous pass exists. This
Page 538 and 539:
Formant TypeRemote ControlMachineTh
Page 540 and 541:
SettingsInhibit Video RecordWhen ch
Page 542 and 543:
Send In/Out Preset optionsBy defaul
Page 544 and 545:
AddPops up the Controller propertie
Page 546 and 547:
Effects stems it is common practice
Page 548 and 549:
Clients State SavingToggles between
Page 550 and 551:
Troubleshooting is always a moving
Page 552 and 553:
No Sound on Live InputsPlease caref
Page 554 and 555:
The I/O Status windowThe I/O status
Page 556 and 557:
This is the size of the buffer used
Page 558 and 559:
Dr. Watson Screenshot 1Then, once a
Page 560 and 561:
Appendix I - Mouse Modifier KeysMai
Page 562 and 563:
NotesLeft Mouse ButtonDrag the note
Page 564 and 565:
ExamplesProject @ 192kHzAES II SRCS
Page 566 and 567:
TASCAM TDIFThe TASCAM TDIF daughter
Page 568 and 569:
PlatformThis drop-down list determi
Page 570 and 571:
Buses Mode and DSP AllocationWhen P
Page 572 and 573:
Bussing CapabilitiesNote 1Bussing c
Page 574 and 575:
Settings > All Settings > Formats &
Page 576 and 577:
Cue Sequencer ControlThe Cue Sequen
Page 578 and 579:
Appendix VII - Mykerinos Latencies1
Page 580 and 581:
IPCONFIG followed by Enter. The IP
Page 582 and 583:
Appendix IX - Pyramix iXML Implemen
Page 584 and 585:
Numerics2,3 and 4 Point Edits 1359-
Page 586 and 587:
Composition LibraryLibrariesComposi
Page 588 and 589:
Fixed Cursor Settings 522Fixed or M
Page 590 and 591:
Window 216Meter Decay integration t
Page 592 and 593:
Record ModeSafety 104Record Name 10
Page 594 and 595:
TTab Windows 430Tail to Beginning 1
show all

V6 User Manual 1.00.book - Studio General

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?