V6 User Manual 1.00.book - Studio General

MixerLevel MeterThis page determines the appearance and behavior of the level meters in the Mixer and Track Headers.All Settings Project Mixer Level Meter PageThese settings only apply to the current Mixer. This allows each Mixer to have its own custom General and LevelMeter settings.To change any of the settings, click the left or right buttons or drag the horizontal scroll bar to increment or decrementthe selected parameter. Alternatively, type directly into the number field for each parameter (these fields willonly accept numbers within the permissible range for each parameter). The color graphic display of the levelmeter will respond immediately to show the effect of Headroom and Alignment parameter changes.HeadroomSets the amount of headroom displayed as red meter segments before clipping. I.e. the numberof dB below 0dBFs at which the red meter segments begin.Note: This headroom value is only for the Mixer meter displays and will not(and cannot) be reported to the Plug-in (VU Meter or Meter Bridge). The VUmeter Plug-in has it’s own headroom setting.Note: If the mixer displays an * next to the Level field value it indicates thata custom value was entered in the Headroom settings.AlignmentSets the alignment level. Displayed by the point on the scale at which the dark orange segmentsbegin.Settings : Mixer 27 - 513