V6 User Manual 1.00.book - Studio General

Organize PageHere Mixer Presets and Settings can be managed:PresetsStoring and Recalling Mixer PresetsMixer Presets can be saved in a user folder or added to the main Mixer Preset list either for the current user or allusers.Default MixerTo Save the current Mixer setup as the default Mixer, select Store Default.Storing New Mixer PresetsTo add a preset to the main list of available Mixer presets I.e. the list which appears when starting a new project,Store New… and enter a name for your Mixer Preset. If the Global box is checked then the preset will be availablefor any user logged on the current machine, if not the preset will be available only for the user that created thenew preset.Removing Mixer PresetsTo remove a preset from the main list, select it and click on Remove Selected. The Remove Preset dialog boxappears with OK and Cancel options.Updating Mixer PresetsTo update a Preset with the current settings, highlight it in the list and select Update Selected... the Update Presetdialog appears asking if you wish to replace the ‘current preset’. Choose OK or Cancel.Recall Selected StateMixer Organize PageThis option recalls parameters, panning, levels etc. from a saved mixer preset and applies these to the currentmixer.Note: This only applies to strips and effects common to both configurations. If the currentmixer does not have the same plug-ins etc. non-coincident items will be ignored.similarly if you recall the state of a 100 strip mixer to a 10 strip mixer the last 90 strips areignored.Saving / Loading Mixer Presets to / from filesMixer Presets can also be stored in Windows folders. Select Load from file... or Save to file... as appropriate. AWindows Explorer window opens enabling a previously saved Mixer Preset to be loaded or the current Mixer Presetto be named and saved to any Windows folder.Mixer : Organize Page 10 - 153