V6 User Manual 1.00.book - Studio General

The Low LPF is a shelving EQ with a slope of 6dB/Octave and a turnover frequency of 100 Hz, the Medium BPF hasa Q (bandwidth) of 0.8 with a center frequency of 2 kHz, and the High HPF is a shelving EQ with a slope of 6dB/Octave and a turnover frequency of 8 kHz.Dynamics ProcessingA comprehensive dynamics processing module. Functions available include one gate, one expander, two compressors,one limiter, and a de-esser. The operation of each of these effects is interrelated in this comprehensivedynamics processor, and the user interface shows the operative dynamic range where each process takes effect.Output Level MaxThis box shows Inactive when auto-gain compensation is on.ThresholdsThreshold controls set the level above or below which the plug-in will affect the dynamics of the input signal. Allthe threshold settings are on the right of the window. From the bottom up, Gate, Expander, Compressor 1, Compressor2, Limiter, and Input Reference Level.Reference LevelSets the input level reference. E.g, setting the reference level to -20 would mean an input level of -20dB is consideredto be the equivalent of unity gain for purpose of calculating the input threshold levels for all dynamics processesexcept limiting. The reference level value is variable between 0dB (unity gain) to -30dB.LimitSets the limit threshold (and ceiling).Dynamics floating WindowEffects and Plug-Ins : Dynamics Processing 13 - 228