V6 User Manual 1.00.book - Studio General

CommandsTo set the Reference Volume level click on the value box to highlight it and type the desired value in the range -20dBfs to 0dBfs then hit Enter or click elsewhere on the window to save the change.Speaker SetsNew SetClicking on New Set creates a new Speaker Set with a blank matrix Grid and adds a new entry to the AvailableSets list with the label highlighted ready for text entry:Type a suitable name and click on a blank area or hit ENTER to accept the name.Duplicate SetCreates a new Speaker Set with a the same matrix Grid settings and Down-Mixes and settings as the set currentlyselected (underlined) and displayed in the grid. The new label is highlighted ready for text entry.Delete SetDeletes the currently selected (underlined) Speaker Set.Down-MixesAdd Down-MixCreates a new Down-Mix associated with the currently selected Speaker Set with a new tab in the Main Grid andDown-Mixes section.Remove Down-MixDeletes the current Down-MixMonitor Configure New Speaker SetMonitor : Configure page 11 - 202