V6 User Manual 1.00.book - Studio General

Buses Mode and DSP AllocationWhen Platform is set to Mykerinos, Buses Mode and DSP Allocation options will be available in a multi boardsystem when more than one board is set On Bus:Buses ModeThe drop-down offers the choice between XTDM (128 buses) PCM, DXD and DSD mode and HDTDM (64 buses)PCM only mode.DSP AllocationThe buttons offer a degree of user control over DSP allocation. To help make sensible choices this is what the DSPprocessing blocks do:Fx Out• All output buses• All VS3 plug-ins inserted on output buses,• All active Output connections.VS3 Control Panel Window Mykerinos PlatformNote: All Fx Out calculations are inherently summing tasks so they need to be processedin the same card - so only one card can be used for this.MixerAll internal calculations that are carried out in the background, allowing INs to be forwarded to OUT buses. It canbe seen as an internal matrix.In the Pyramix user interface, this is only reflected by the numbers of Ins routed to OUTs, no plug-ins, input stripsor output buses are calculated here.Mixer can be calculated in a single DSP or can share DSP with Fx In or with Fx Out.Appendices : Appendix III VS3 Control Panel 29 - 570