V6 User Manual 1.00.book - Studio General

Values can be increase by simply typing the number of dB required or decreased by typing - (minus) before thenumber in the Trim box. The Fade box allows a value in ms to be entered. This defines the length of fade which isautomatically applied at the beginning and end of the selected range from and to the original values.Note: dB applies to level changes. If the automation curve is displaying frequency, values will be in Hz and so on.Show Automation Track VersionsOpens the Automation Tracks Versions window:Automation Tracks WindowAutomated ControlsThe Automated Controls pane displays all the automatable controls in a tree structure. The last control written isautomatically selected. The Automation Tracks Versions pane shows all the automation passes for the selectedcontrol in a tree structure. Double-clicking a version makes it current. If a previous version is made current and afurther automation path written, a sub-branch results. In the example above two passes were made then version 1was recalled by double-clicking it. Four further passes were made labelled 1.1.1, 1.1.2, 1.1.3 and 1.1.4. Then version1.1.2 was recalled and two further passes made labelled 1.1.2.1 and 1.1.2.2. Then 1.1.2.1 was recalled andtwo more passes made producing 1.1.2.1.1 and 1.1.2.1.2. We were still unhappy with the mix so recalled 1.1.2.2and produced the final version, 1.1.2.2.1. The times when the passes were written reflects this.Label Current VersionLock Current VersionUnlock Current VersionDelete Current VersionExport Current Versioncreates a copy of the current version for the selected control or branch of controls,gives it a name that will be displayed in the version Tree and locks it/them. Thismakes it easy to recall a given and easily identifiable version of the automation forthe whole mixing console. A warning dialogue is shown if the item selected is anythingother than Mixer.Locks the current versionUnlocks the current versionDeletes the current version. Subsequent passes are re-numbered as necessary.Exports the current Track or Branch as an XML file.Unlock All VersionsClean Up VersionsDelete All VersionsUnlocks all versions in the tree.Deletes all versions except the most recent.Deletes all the automation passes for the selected control.Automation : Display and Editing of Automation Data 14 - 270