V6 User Manual 1.00.book - Studio General

PasteCopy InfoPaste InfoValidate PQ Validates the PQ for the disc. (Please see Red-Book Validation on page 410)MarkersCutCopyPasteDelete Selected Track(s)Clear All MarkersDeletes selected track(s) complete with clip, Markers, Automation etc.Clear all the PQ markersCD Mark GroupsGenerate PQ markers automatically from clips or clip groups.Add Start MarkerAdd Stop MarkerAdd a Start Marker to the cursor position.Add a Stop Marker to the cursor position.Add Index MarkerAdd a Index Marker to the cursor position.OffsetsValidate nameShow OffsetFor a track selected in the right-hand pane: Removes the “*”, which is included inthe name of an auto-generated marker and copy the name of the Start Marker tothe Stop marker (if it is the last track in a disc), with a “stop” suffix added at the endof the Stop Marker name.Move the PQ marker to reflect the final position of the markers with offset. TheTable of Content page always displays the final PQ code with offset; so this functionis useful to show the real position of the marker on the Timeline or when youwant simulate the final CD with the CD player.ISRCCopy First StartCopy Last StopCopy StartCopy StopCreateInc. SelectionApply the Offset before first Track value.Apply the Offset after last Stop value.Apply the Offset before start value.Apply the Offset after stop value.Create ISRC for the selected track(s) using the ISRC default parameters in the CDProperties page. If there is more than one selected track, the ISRCs are first createdon the first selected track then incremented for the other(s).Increment the designation code part of the ISRC for the selected track(s).CD-TextValidate ISRCCopy AllCheck if the ISRC code is correct and correct it if it’s bad.Copy all the CD Disc information to the selected track(s) CD Text fields.CD/SACD Mastering : CD/SACD Tab Window Menus 24 - 406