V6 User Manual 1.00.book - Studio General

Examples:Jog Wheel ModeThe buttons select the hardware Jog Wheel Mode from a choice of Jog, Shtl, Loop, Nav or Off. Many controllerswill have buttons either corresponding to these functions or mappable to them.The Shuttle slider is provided for convenience when using the Transport Control Panel.In the following examples there are three machines. At the top of each window is the host Pyramix InternalMachine. Below this is a BETACAM - PVW-2800 and the third machine is a BiPhase transport or transports. (Via theMTUsbSync Board) Both External Machines are controlled via the Sony 9-pin P2 protocol.Transport Control ExamplesIn the left-hand example the Host Pyramix is Master and both External Machines are in Chase and Locked.In the right-hand example the Betacam is now the Master and both the Internal Pyramix and External BiPhaseMachines are in Chase and Locked.Note: Machines NOT in chase can be used independently of the Master while the Masteris in use by using their individual controls. So you can locate on a machine whilst continuingto mix using the Master and slaves.Machine Control : Transport Control Panel 21 - 388