11.07.2015 Views

V6 User Manual 1.00.book - Studio General

V6 User Manual 1.00.book - Studio General

V6 User Manual 1.00.book - Studio General

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Settings > All Settings > Formats & Syncmake sure that the "Wordclock is Input at 44.1k x 2" checkbox is NOT checked when operating in DSD mode.To verify Pyramix is correctly locked to incoming Word clock:Left-click on the red 'LED' in the Sync: WordClock box (bottom right of Pyramix screen in the status bar). This willopen the I/O status window The green LEDs indicate active inputs and there will be a red LED in front of the chosensync source if this is locked.Right-click on the same (Sync: WordClock) red 'LED'. Select, Debug > Input Check. This window will enable youto check that Pyramix is effectively locked at the correct frequency.Project TypesDXD Mixing ProjectThe DXD Mixing Project can be used use for recording, editing, mixing, processing and mastering DSD/SACD inDXD format (352.8 kHz - 32 bits)Opening a DXD Mixing ProjectWhen an existing DXD Mixing Project is opened this dialog appears:Would you like to convert this DXD Mixing Project into a DSD only Project?If the answer is YES the project will be opened in DSD mode and the DXD mixer will be replaced by a defaultmono mix 8x8.If the answer is NO the project will be opened in DXD Mixing mode with the DXD Mixer in the same configurationas it was when the Project was Saved.DSD ProjectThe DSD Project - can be used recording, editing and mastering DSD/SACD in DSD format (2.8 MHz - 1 bit) Projectfor recording, editing and mastering DSD/SACD in DSD format (2.8 MHz - 1 bitOpening a DSD ProjectWhen an existing DSD Project is opened this dialog appears:)Convert DXD Project to DSD Project mode? dialogWould you like to convert this DSD Project into a DXD Mixing Project ?If the answer is YES the project will be opened in DXD Mixing mode. (Though all your media files will remain inDSD IFF format)If the answer is NO the project will be opened in DSD mode as it was when created.Peak Values in DSD and DSDIFF Media FilesPeak ComputationsConvert DSD Project to DXD Mixing Project mode? dialogAppendices : Appendix V Optional Features 29 - 574

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!