V6 User Manual 1.00.book - Studio General

• Surround Center (Cs)By Default a 2 channel Aux Send Bus is initialized to L-R and a 6 channel Aux Send Bus is initialized to 5.1. Thiscan be changed/customized in the Configuration Page.Note: When an Aux Send bus is added it is important to ensure that the Type for eachchannel of the Aux Send bus is set correctly.Aux Send Bus Context MenuAs with other buses, Clicking on an Aux Send bus’s small gray box on the right-hand edge of the mixer windowExpands / Collapses the send display. When the cursor is above the box the Aux Send Bus pop-up context menuopens:Aux Send bus pop-up context menuMost of the entries are the same as other buses, but the last two entries are specific to Aux Send buses.Mixer : Mixer Components 10 - 166