V6 User Manual 1.00.book - Studio General

CD Offset default parametersThese parameters are used when the offset of a PQ marker is set to zero and you enable them by ticking the boxes.CD Start Offset EnabledCD Index Offset EnabledCD Stop Offset EnabledOffset values can be typed and/or adjusted using the increment decrement buttons.Offset before first StartNegative offset applied to the first PQ start marker only.Offset before StartNegative offset applied to all PQ Start markers except the first one.Offset after stopPositive offset applied to PQ Stop marker except the last one.Offset after last stopPositive offset applied to the last PQ stop marker.Offset before IndexNegative offset applied to PQ index marker.ISRC default parametersThese parameters are used to automatically create or increment ISRC with the function ISRC > Create & ISRC > IncSelection are invoked from the Offsets and ISRC menus. (Right-click anywhere in the right-hand pane)All these parameters are stored in the project. If you want to define the value as Default value, right click on thevalue and select “Set as Default”.Country Code2 characters (GB, SW, FR etc…)Producer3 characters (W01).Year of Reference2 digits ( 02).Designation Code5 digits (00012, 80010).Increment byUsed to auto increment the designation code part of the ISRC. The default value is “1”.CD/SACD Mastering : Default Settings 24 - 408