V6 User Manual 1.00.book - Studio General

OffNo noise shaping added.Hi PassThis provides a first-order high-pass filter for the noise transfer function. This type of noise shaping takes littlecomputational power to produce, but at the expense of not tracking the characteristics of the human ear veryaccurately when compared with:AcousticPsycho acoustically noise shaped dither inserts an FIR-filter in the feedback path. This shapes the noise as closelyas possible to the characteristics of the human ear. More taps in this type of filter allow a closer approximation tothe response curve of the ear, but each tap, of course, increases the computational instructions required. The filterimplemented here is a 9-tap FIR-filter, which closely approximates the curve of the human ear.Note: As usual there is no “free lunch”. So Acoustic noise-shaping uses more resourcesthan Hi Pass.POW-rPOW-r offers the choice of three settings, POW-r 1, POW-r 2 and POW-r 3. The graph indicates the effect of thenoise-shaping.Dithering POW-r floating WindowMixer PresetsMixer Presets can be saved in a user folder or added to the main Mixer Preset list either for the current user or allusers.Default MixerTo Save the current Mixer setup as the default Mixer, right click on the Mixing Console and select Memory > Presets> Store > Default.Storing New Mixer PresetsTo add a preset to the main list of available Mixer presets I.e. the list which appears when starting a new project,right click on the Mixing Console, select Memory > Presets > Store > New… and enter a name for your Mixer Preset.If the Global check box is checked then the preset will be available for any user logged on the currentmachine, if not the preset will be available only for the user that created the new preset.Removing Mixer PresetsTo remove a preset from the main list, right-click on the Mixing Console, select Memory > Presets > Remove >(preset you wish to remove). The Remove Preset dialog box appears with OK and Cancel options.Mixer : Mixer Presets 10 - 189