V6 User Manual 1.00.book - Studio General

Channel Combo BoxShows which channel has the plug-in that the window is currently controlling. Clicking the arrow drops down a listof all channels that have this plug-in assigned to them. Click on a name to selected a channel from the list. Thecontrol values will change to reflect the current state of the plug-in on the selected channel. This feature enablesall instances of a particular plug-in to be controlled from the same interface window without opening duplicatewindows for each channel.Bypass SwitchThe On/Off (bypass) switch when lit red the effect is bypassed but remains “in circuit”. Well behaved effects willmaintain their internal parameters in this state so that they can be switched back in without artefacts.Bypass all EffectsClicking on a bypass button with Shift bypasses all effects in the strip.Auto Gain Compensation(Only where relevant) When this switch is lit Auto Gain Compensation is in circuit. The function is intended tokeep the output level of the plug-in approximately equal to the input level. The computed value varies as theplug-in controls are adjusted and can be further adjusted using the knob.Output GainManually adjusts the gain applied at the output of the plug-in. The value is shown in dB.Effects PresetsRight-clicking in the Plug-in window pops-up a contextual menu which enables the plug-in to be Reset to itsdefault values. Presets can be Recalled, Stored or Removed and Imported or Exported to and from libraries.Choosing PresetsEffects Presets context menu and recall sub-menuClick on the desired preset from the list. The plug-in's parameters will be set to the values stored in the preset.Effects and Plug-Ins : Adding and Managing Effects 13 - 224