V6 User Manual 1.00.book - Studio General

Note: If you choose a Track AND a specific parameter to display in this dialog then youshould turn Auto Display OFF.Track With Existing Automation DataIf the track has pre-existing automation data then right-clicking the Show/Hide Automation opens this menu.Track Automation context menuMixerAuto DisplayThe current parameter displayed is shown at the top of the menuWhen Auto Display is checked the automation data to be displayed will be fromthe last control associated with the track that has changed state. (Defaults is ON)Note: Auto Display should normally be off when any control not on the connected strip is displayed or youwish to view automation data from a specific control.Select Displayed Automation TrackOpens the Select Displayed Automation Track dialog as above.Show Automation Track VersionsSee next page.InitSnapshotSnapshot RegionDelete PointsTrimCreates an initial automation track for mouse editing. The initial version is createdwith the current state of the mixing console control.Creates a snapshot of the currently displayed control curve.Creates a snapshot of the control curve in the current region.Deletes all automation points from the control curve in the current region.See next pageTrimWhen automation Trim is invoked a dialogue box opens which enables the automation points values in the currentlyselected range to be trimmed:Track Trim Automation dialogAutomation : Display and Editing of Automation Data 14 - 269