V6 User Manual 1.00.book - Studio General

Sony 9 - Pin Protocol Configuration (Pyramix controlled by external device)Sony 9-Pin Configuration dialogDevice Request SettingsThe Sony 9-pin P2 protocol transmits a code to identify the machine. Some machine controllers will do nothing orexhibit aberrant behavior if they do not recognize the identifier code. Therefore, Pyramix can masquerade asanother device. The device identifier can be selected from a long list in the Show the system as a: combo box.Jog/Var/Shuttle Still SettingsThe radio buttons determine Pyramix behavior When receiving Jog/Var/Shuttle with speed = 0 commands:• Jog/Var/Shuttle with Speed = 0 (default)• StopNote: When using a controller with a jog wheel please keep the Jog/Var/Shuttle ...Speed = 0 default setting.MonitoringFilter Monitoring Commands (EE On/Off) when ticked, E to E On and off commands are filtered out.Print Masters Track BanksThe selected banks of 8 tracks are armed for recording when any OTHER track is armed. This is primarily usefulwhen recording a Print Master or Masters at the same time as stems. E.g. if you are recording Dialogue, Music andSettings : Remote Control 27 - 545