V6 User Manual 1.00.book - Studio General

CD-R/CD-RWWhen a CD-R(RW) is the selected target, the arrow beside the Record button drops-down a list of options:.EjectRetractDisk InfoFix DiscErase DiscDrive InfoSettings...Opens the loading tray on the target driveCloses the loading tray on the target driveReads the target disc’s information and displays it in the Results boxWrites the information necessary to allow a Track at Once disc to be read by a CDplayer.Erases a re-writable discInterrogates the optical drive firmware and displays information about the drive inthe Results boxThe Settings... button is grayed out unless a suitable optical drive or image file has been selected. When available,clicking on Settings... opens a dialogue with access to all relevant settings. In particular, this is where you canchoose between Disc-at-Once and Track-at Once modes. Use Disc-at-Once for maximum compatibility.RecordClicking on the Record button initiates the recording process.Detailed reporting about the progress of the process is shown in the Results box as the recording is made.InfoShows the Write speed of the target drive or the path if you are writing a DDP file to a folder. Also shows the chosenrecord mode, e.g. Track At Once or Disk At Once.StatusShows the status of the recording device/processProgressA ‘thermometer’ bar graphically shows the progress of the recording.BufferAnother ‘thermometer’ showing the state of the record buffer.ResultsThis box displays detailed information about various aspects of the process depending on what you are doing atthe time.Table Of ContentDisplays the TOC in detail.Print TOC...Opens a Print Options dialog. The actual options available will depend on the printer you have selected.Save TOC...CD/SACD Mastering : DiscWrite 24 - 420