V6 User Manual 1.00.book - Studio General

Track Clicking on the third from the right button cycles through four different time displayoptions. Elapsed time from start of CD, Time remaining from the End of the CD. Elapsed timeof Track and Time remaining from end of TrackFrame Shows/hides the CD frames displayRndGhost TrackNormally a CD begins from the first track which has a 2 second pause. Pyramix allows you to modify this and createa ghost track; a track before the first track. To accomplish this simply add a CD Index Marker at the beginning ofyour ghost track, before the first start marker. You can also edit the pause of the first track then this will create ormove the ghost marker index for you.Multiple CDs or versions in one ProjectAll CD Information and CD Markers can be either "global" or per Track Group. Each Track Group that has the Destinationtype and Free Markers enabled has its own CD Information and CD Markers. This enables multiple versionsof PQ editing for an album to be handled and for multiple CD albums in the same document. The CD Info andMarkers displayed in the CD Tab Window follow the currently selected Track Group.Red-Book ValidationValidate PQ: This function ensures that the PQ conforms to the Red Book specifications by carrying out the followingchecks and corrections.• When a pause is less than 1 second, the pause is removed. (The offset is automatically dealt with).• Track Length is set to 4 second if it is less. (The offset is automatically dealt with).• Track count is reduced to 99 if greater• ISRC is removed if it is incorrect• UPC/EAN is removed if it is incorrectThis function an be undone if necessary.DDP ImportYou can use the DDP import function Project > Import > DDP Import to import a DDP tape or file and generate anew CD image file. From this CD image file you can burn a CD or generate a new DDP tape.CD/SACD Mastering : Ghost Track 24 - 410