V6 User Manual 1.00.book - Studio General

Then select: Pyramix : Download : Documentation : Controllers, and choose the required document for download.For links to Controller and Console manufacturers go to:www.merging.comThen select: Pyramix : Controllers and choose the relevant manufacturers link.Control by External DeviceIf Pyramix is to be controlled by another device or devices, these are installed via Settings > All Settings RemoteControl > Controller (See: Controller on page 543 ) and, where applicable, Pyramix functions are mapped to thecontroller via the Settings > All Settings > Project > Controller Mapping page. (See: Controller Mapping onpage 512)9-pin Configuration (Pyramix controlled by external device)Please see: Sony 9 - Pin Protocol Configuration (Pyramix controlled by external device) on page 545EMCScopeEMC includes HUI and Mackie Control Support.The following controllers are supported and validated:• Mackie MCU in HUI and MackieControl modes• Yamaha DM1000 in HUI mode• Yamaha DM2000 in HUI mode• Raditec SAC2-k in HUI mode (MackieControl is not working properly)• Tascam US-2400 in HUI mode (US-2400 MackieControl mode is specifically configured for other DAWsthan Pyramix)KeyValid Remote Control Support and Remote Control – Midi Enhanced Midi protocol keys are required to use EMC.Remote Control : Control by External Device 22 - 392