V6 User Manual 1.00.book - Studio General

square to the left of each track displayed allows tracks to be de-selected/selected for playback in the Trimmer.Clicking on the ? at top-left opens the Media Trimmer Commands list:Media, Clips or Compositions can be trimmed in the following ways:• Double-click: Plays the object through the Monitoring Section from the point where you double-click.Note: If no sound is heard through the current L & R Monitor Outputs you may need toassign values to the None entry in the Main Grid and Downmixes section of the MonitorPlease see: Media Manager Monitoring on page 204• Click & Drag: Drag the object to the timeline or to an other library properly trimmed (from the In point tothe Out point. Dragging it from the list view takes it untrimmed).• Shift + Click: Sets the Trim In point. The point can be modified later by simply clicking on it.• Control + Click: Sets the Trim Out point. The point can be modified later by simply clicking on it.• Control + Shift + Click: Sets a Sync Point. The point can be modified later by simply clicking on it.• Shift + Alt + Click: Sets the Trim In point and plays from it.• Control + Alt + Click: Sets the Trim Out point and plays from it.• Control + Shift + Alt + Click: Sets the Sync Point and plays from it.• Control + Double-Click: Resets the Trim In and Trim Out and Sync Points.Trim In, Trim Out and Sync PointsThe Trim In, Trim Out and Sync Points are permanently preserved for Compositions and MasterClips stored in aLibrary (Project or Global), but only until the next Mount or Refresh for mounted Media in the Media ManagementWindow.CompatibilityBecause the Media Trimmer allows Trim In, Trim Out and Sync Points to be set and saved in current libraries amenu option: Library > Save Library As 4.x allows libraries to be saved in a format compatible with version 4.x.for maximum compatibility.Media Management : Tools and Menus 4 - 47