V6 User Manual 1.00.book - Studio General

Making Settings Changes to Multiple TracksChanges to Tracks settings can be made on a multiple selection of tracks. Press Ctrl and Click on a track to add orsubtract it or press Shift to select a contiguous range of tracks.Changing Repro or Input connectionsClicking in the column field to drops down a list of available connections. Highlight the required connection toselect it.With a range of tracks selected, choosing a connection from the list assigns all selected tracks to the same connection.If Alt is held down while choosing the selected tracks are connected in ascending order.Track Tab Column FieldsNameThe name of the Track. Up to 29 characters are visible in this field but longer names are accepted. Click in the fieldor use F2 to enter a new name.Repro ConnectionShows which Mixer Input Strip (and Channel if applicable) the track is connected to. Clicking in this column fielddrops down a list box with all available Mixer Input strips (and Channels). Strip number on the left followed byChannel Tag with the Strip Name in brackets.Input ConnectionShows which Input is feeding the track. Clicking in this column field drops down a list box with all available physicalinputs and Internal Return buses.GroupShows which Track Group (if any) the track belongs to. (see below) Clicking in this column field drops down a listbox with all available Track Groups.SoloIf YES track is soloed.Clicking in this column field toggles between YES and blank.MuteIf YES track is muted.Clicking in this column field toggles between YES and blank.Record ReadyShows the current record ready state. Clicking in this column field drops down a list box with the three possiblestates, Safe, Record Ready and Auto-Punch.MonitoringShows the current monitor mode. Clicking in this column field drops down a list box with the three possiblemodes, Auto, Input and Repro.HiddenIf YES the track is not visible in the Timeline but continues to operate normally. Clicking in this column field togglesbetween YES and blank.Always VisibleIf YES the Track will always appear on screen (if there is sufficient room) even when scrolling other tracks.CollapsedIf YES the track is a member of a Track Group currently collapsed. (see below)Display ModeShows the current Clip Display Mode mode. Clicking in this column field drops down a list box with the three possiblemodes, Block, Waveform or EnvelopeShow AutomationTracks Tab pop-upTracks and Track Groups : Tracks Tab Window 5 - 79