V6 User Manual 1.00.book - Studio General

Source - CD DriveWhen the chosen Source is CD: ...., the left-hand button below the Source drop-down list will be Eject and theright-hand one Settings...EjectDiscWrite Source - CD Eject Drop-Downopens the loading tray of the selected optical disk drive (or ejects the disk if the drive is a slot-loader). Clicking onthe down arrow next to the Eject button drops down a list of other optical disk drive commands.RetractDisk InfoDrive InfoCloses the loading tray on the source driveReads the disc information and displays it in the Results boxInterrogates the optical drive firmware and displays information about the drive inthe Results boxSource - U-Matic TapeSony PCM-1630 master tapes can be imported. Please see: Importing a U-Matic Tape on page 423InfoTargetThe Info box shows either the read speed of the optical drive or the path to the image file.The drop-down list enables the user to choose between any installed CD-R or DDP drives or a DDP FolderDDP FolderWhen DDP folder is the selected target the button beside the Record button drops-down a list of options:DiscWrite Target - CD Eject Drop-DownVerifyVerifies the recordingSelect Folder...Opens a Browser to enable a suitable folder to be chosenSettings...Opens a window with DDP settings information and options.CD/SACD Mastering : DiscWrite 24 - 419