V6 User Manual 1.00.book - Studio General

RemoveIf a machine is selected (highlighted) in the list, clicking Remove uninstalls the machine and removes it from thelist.PropertiesClicking on the Properties button opens the Machine Properties dialog box (see below)OKClick OK to accept changes (if any) and close the Machines page.CancelClick Cancel to reject changes (if any) and close the Machines page.ApplyClick Apply to apply changes without closing the Machines page.Machine PropertiesMachine Properties dialogWhen the Machine Properties dialog is opened by the Add button, the Name, Protocol and Port displays areblank. When the dialog is opened by the Properties button the displays reflect the name etc. for the selectedmachine.NameDisplays the name of the current selected machine. When adding a new machine, type a suitable name here.DriverDisplays the current interface protocol Sony (9-pin P2 protocol) in the drop-down list. (Currently Sony only)Driver - PropertiesOpens the Sony 9 - Pin Protocol Configuration dialog box (see below) when SONY is selected. There are currentlyno options for MMCSettings : Remote Control 27 - 539