V6 User Manual 1.00.book - Studio General

LocatePressing theLocate button pops up the Goto Timecode dialog:The register shows the machine’s current TimeCode position value and is highlighted, ready for typed input. Thevalue can also be adjusted with the increment/decrement buttons. Clicking the OK button sends the machine tothe TimeCode value in the register and closes the dialog.A Preroll value can also be set. This value is retained and will be present when the dialog is next opened from anyMachine control panel.Note: Goto TimeCode has no effect if it is invoked from a machine in Chase Mode.Internal Machine panel - FeaturesTransport ControlsGoto TimeCode dialogThe Internal Machine panel has the same transport controls as the Transport Control Bar with some extras:The Rewind button moves the Play Head at an accelerated speed backward through theComposition. A second press doubles the speed.The Play Selection button plays the current highlighted selection area.The Play button plays the Composition at normal speed forward from the current position ofthe Play Head. A subsequent press Pauses playback and another Restarts.The Record button puts Pyramix into Record mode, and creates a new recording to the diskon the Tracks previously armed for recording. The Play Head moves forward at normal Playspeed during the recording.The Fast Forward button moves the Play Head at an accelerated speed forward through theComposition while it is being pressed. A second press doubles the speed.The Stop button stops playback.Pops up the Goto Timecode dialog. See above in Internal / External Machine panels -Common FeaturesMachine Control : Transport Control Panel 21 - 384