V6 User Manual 1.00.book - Studio General

Delay CompensationDelay Compensation IndicatorA small button labeled D on the right-hand side of the mixer adjacent to the Fader line indicates the current stateof delay compensation in the mixer:A stable green indicates that delays are compensated.Stable red indicates that delays are not compensated.Blinking red indicates that you need to adjust the maximum length of delay that can be compensated in order toachieve proper compensation.Maximum Delay CompensationPyramix sets a default value for the maximum number of samples of delay that can be compensated automatically.As effects are added the required total delay value is calculated. If an Effect is instantiated that will exceedthis limit the Mixer error: Delay compensation dialog appears:To deal with the problem either remove an effect or effects or go to Settings > All Settings > Project > Mixer >Mixer Settings and increase the Max Mixer delay Compensation - Delay setting to a value slightly in excess ofthat proposed in the dialog.Note: Increasing the Delay value too much steals valuable memory from MassCore.Outboard LatencyTypical latency in ms of outboard gear ranges from 2 to 5 ms. The following chart may help you to compute theproper delay compensation values for outboard equipment:Mixer : Mixer Delay Compensation 10 - 178