V6 User Manual 1.00.book - Studio General

Each + - box also pops-up a menu relevant to the area of the mixer it deals with when the cursor is above it. E.g. :Simple 8 X 2 stereo mixer + - pop-up menusCollapse/HideChoosing Collapse leaves a small artefact of the mixer area visible, a gray horizontal bar with a + box at the righthandside. Hide completely removes the area from view. Choosing Show All in the Mixer + - pop-up will restore.ResetsThese context menus also provide a convenient way to restore all controls of specific types or, in the relevant sections,the entire strip or mixer to the default condition.Bus + - context menusThe precise content of this pop-up depends on the type of bus and whether there are multiple stems:Set All to 1st StemAs it says. All sources will be routed to the first stem of a multiple bus.Set All ON/OFFActivates/deactivates the routing to a Bus or Bus Stem for every Input Strip.Auto-SelectIs exactly the same function as the one provided in the right-click menu over a Multi Mono bus from the 1st strip;ie it auto-sets the routing of every strip’s channels to a Multi Channel Bus, so that (as far as possible) each InputStrip channel is routed to a Bus channel matching the same grid index (diagonal routing).Mixer : Mix ! 10 - 157