z/VM: System Messages and Codes Š CP - z/VM - IBM

TRD010 TRR006
information on gathering the documentation you need to
assist IBM in diagnosing the problem, then contact your
IBM support personnel.
TRD010
Explanation: The module that issues this abend is
distributed as object code only; therefore, no source
program materials are available.
User Response: Refer to z/VM: Diagnosis Guide for
information on gathering the documentation you need to
assist IBM in diagnosing the problem, then contact your
IBM support personnel.
TRI007
Explanation: The module that issues this abend is
distributed as object code only; therefore, no source
program materials are available.
User Response: Refer to z/VM: Diagnosis Guide for
information on gathering the documentation you need to
assist IBM in diagnosing the problem, then contact your
IBM support personnel.
TRI010
Explanation: The module that issues this abend is
distributed as object code only; therefore, no source
program materials are available.
User Response: Refer to z/VM: Diagnosis Guide for
information on gathering the documentation you need to
assist IBM in diagnosing the problem, then contact your
IBM support personnel.
TRQ001
Explanation: A TRQBK is being queued, when it is
already on the queue.
User Response: Examine the CP trace table and
storage dump to see if the block in error has been
placed on the queue already. CR12 points to the next
available CP trace table entry after the failure.
TRQ003
Explanation: The queue of TRQBKs appears to be
empty.
User Response: Examine the CP trace table and
storage dump to determine why the queue is empty.
There should always be at least a dummy TRQBK that
acts as a placeholder in the queue.
TRQ004
Explanation: (soft abend) A TRQBK was dequeued
out of order.
User Response: Examine the CP trace table and
108 z/VM: System Messages and Codes — CP
storage dump to determine why the TRQBK was
queued out of order. The most likely cause is that some
module other than HCPTRQ changed the timer
expiration value in this TRQBK (or another one in the
same section of the TRQBK hash table) after it was
already in the TRQBK queue. Since HCPTRQ manages
the queue based entirely upon this expiration value, it
should not be changed while the TRQBK is enqueued.
TRQ005
Explanation: A failure was recognized while
reorganizing the TRQBK hash table.
User Response: Examine the CP trace table, storage
dump, and a listing of module HCPTRQ to determine
what the failure was. R0 points to the location in
HCPTRQ at which the failure was recognized.
TRR001
Explanation: The module that issues this abend is
distributed as object code only; therefore, no source
program materials are available.
User Response: Refer to z/VM: Diagnosis Guide for
information on gathering the documentation you need to
assist IBM in diagnosing the problem, then contact your
IBM support personnel.
TRR004
Explanation: The module that issues this abend is
distributed as object code only; therefore, no source
program materials are available.
User Response: Refer to z/VM: Diagnosis Guide for
information on gathering the documentation you need to
assist IBM in diagnosing the problem, then contact your
IBM support personnel.
TRR005
Explanation: The module that issues this abend is
distributed as object code only; therefore, no source
program materials are available.
User Response: Refer to z/VM: Diagnosis Guide for
information on gathering the documentation you need to
assist IBM in diagnosing the problem, then contact your
IBM support personnel.
TRR006
Explanation: The module that issues this abend is
distributed as object code only; therefore, no source
program materials are available.
User Response: Refer to z/VM: Diagnosis Guide for
information on gathering the documentation you need to
assist IBM in diagnosing the problem, then contact your
IBM support personnel.