z/VM: System Messages and Codes Š CP - z/VM - IBM

Chapter 3. System Messages
Messages are generated by the system in response to either an action or lack of
action that has been detected. This section provides complete descriptions of the
various z/VM messages the user may receive.
Control Program (CP) Messages
HCP001E Unknown CP command: command
Explanation: The command specified is not a valid
CP command.
System Action: The command is not executed;
system operation continues.
User Response: Reissue the command in full or in
the proper abbreviated form.
HCP002E Invalid operand - operand
Explanation: If the OVERRIDE command was issued,
this indicates that an override control statement contains
an invalid operand.
Otherwise, you did not correctly specify one of the
command’s operands.
System Action: If the OVERRIDE command was
issued, the control statement containing the invalid
operand is displayed just prior to this message.
OVERRIDE processing is terminated after scanning the
remaining control statements for syntax and the new
override structure is not activated.
Otherwise, the command is not executed; system
operation continues.
User Response: If the OVERRIDE command was
issued, correct the invalid operand in the control
statement and reissue the OVERRIDE command.
Otherwise, reissue the command with a valid operand.
HCP003E The variations of this message are
explained below.
MESSAGES:
v Invalid option - option
v Invalid option - {command|statement} contains
extra option(s) starting with option
Explanation: You did not correctly specify one of the
command’s or statement’s options, or no option was
specified causing the default option of this command,
which is not valid, to be assumed. If you specified an
option, it probably was:
v Not valid with this particular variation of the command
or statement
v A shorter abbreviation than is allowed
v An extra token specified on the command or the
statement line
v Rejected by an external security manager (ESM) if
you are not authorized to enter the command.
If you see the second or third version of this message
({command | statement} contains extra option(s)
starting with option), you specified more options than a
command or statement allows. CP displays the first
extra option you specified.
System Action: CP does not execute the command or
process the statement; system operation continues.
User Response: Enter the command again or correct
the configuration file and:
v Specify a valid option.
v Specify the option only once.
v Do not specify extra options.
v Contact your system administrator to obtain
authorization to use this command.
HCP004E Invalid hexloc - hexloc
Explanation: The hexadecimal location data you have
supplied is incorrect for one of the following reasons:
v The operand contains nonhexadecimal data.
v The operand is longer than eight characters.
v The hexadecimal location was not aligned to a
machine address boundary that the operation
requires.
If the operand was not a hexadecimal location, it was
misspelled.
System Action: The command is not executed;
system operation continues.
User Response: Reissue the command; correctly
specify the operand.
HCP005E Invalid hexdata - hexdata
Explanation: The hexadecimal data you have supplied
contains one or more of the following:
v Nonhexadecimal characters
v More than eight characters.
© Copyright IBM Corp. 1991, 2004 137