z/VM: System Messages and Codes Š CP - z/VM - IBM
z/VM: System Messages and Codes Š CP - z/VM - IBM
z/VM: System Messages and Codes Š CP - z/VM - IBM
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
H<strong>CP</strong>3566E Path configuration error for device<br />
device.<br />
Function: function<br />
Explanation: A serious error has occurred during path<br />
configuration for the named device.<br />
<strong>System</strong> Action: The system will attempt to activate<br />
the device, but without multipathing capability.<br />
Operator Response: Look for other related messages<br />
that may have been issued at the time of failure. Follow<br />
normal procedures for resolving system problems.<br />
Programmer Response: Contact your <strong>IBM</strong> Support<br />
Center personnel to diagnose <strong>and</strong> correct the problem.<br />
H<strong>CP</strong>3567E Wrong parent type (type) for device<br />
device.<br />
Function: function<br />
Explanation: The SET_TYPE attribute (value in<br />
parentheses) of the named parent F<strong>CP</strong> Protocol device<br />
is not valid.<br />
<strong>System</strong> Action: The system will attempt to activate<br />
the device, but with not all paths active or without<br />
multipathing capability.<br />
Operator Response: Ask the person responsible for<br />
system configuration to check the configuration<br />
database <strong>and</strong> verify that the SET_TYPE attribute of the<br />
named device has been properly specified.<br />
Programmer Response: If the problem persists<br />
contact your <strong>IBM</strong> Support Center personnel to diagnose<br />
<strong>and</strong> correct the problem.<br />
H<strong>CP</strong>3568E fp_opendev failed. resource<br />
name=name, return value=value.<br />
Function: function<br />
Explanation: The internal open (fp_opendev) of the<br />
named F<strong>CP</strong> Protocol device failed for the reason<br />
indicated by return value. This is done as part of<br />
loadDevice for a scsidisk device. The named device<br />
may be an element in one path to the device if multiple<br />
paths exist.<br />
<strong>System</strong> Action: If multiple paths exist to the scsidisk<br />
device, the system will attempt to activate the device via<br />
one or more other paths.<br />
Operator Response: Examine the return value <strong>and</strong><br />
perhaps other related messages issued at the time of<br />
the failure. Follow normal procedures for resolving the<br />
problems indicated.<br />
Programmer Response: If the problem persists<br />
contact your <strong>IBM</strong> Support Center personnel to diagnose<br />
<strong>and</strong> correct the problem.<br />
H<strong>CP</strong>3566E H<strong>CP</strong>3571E<br />
H<strong>CP</strong>3569E fp_ioctl for SCIOLSTART failed.<br />
resource name=name, return<br />
value=value.<br />
Function: function<br />
Explanation: An internal request (fp_ioctl)to START<br />
the scsidisk device (LUN) failed for the reason indicated<br />
by return value. This is done as part of loadDevice for a<br />
scsidisk device. If multiple paths to the device exist,<br />
resource name will identify a specific failing path. If no<br />
paths are defined for the device, resource name will<br />
identify the device itself.<br />
<strong>System</strong> Action: If multiple paths exist to the scsidisk<br />
device, the system will attempt to activate the device via<br />
one or more other paths.<br />
Operator Response: Examine the return value <strong>and</strong><br />
perhaps other related messages issued at the time of<br />
the failure. Follow normal procedures for resolving the<br />
problems indicated.<br />
Programmer Response: If the problem persists<br />
contact your <strong>IBM</strong> Support Center personnel to diagnose<br />
<strong>and</strong> correct the problem.<br />
H<strong>CP</strong>3570E fp_ioctl for SCIOLQWWN failed.<br />
resource name=name, return<br />
value=value.<br />
Function: function<br />
Explanation: An internal request (fp_ioctl)to query the<br />
Fabric Name Server failed for the reason indicated by<br />
return value. This is done as part of loadDevice for a<br />
scsidisk device. If multiple paths to the device exist,<br />
resource name will identify a specific failing path. If no<br />
paths are defined for the device, resource name will<br />
identify the device itself.<br />
<strong>System</strong> Action: If multiple paths exist to the scsidisk<br />
device, the system will attempt to activate the device via<br />
one or more other paths.<br />
Operator Response: Examine the return value <strong>and</strong><br />
perhaps other related messages issued at the time of<br />
the failure. Ask the person responsible for system<br />
configuration to check the configuration database <strong>and</strong><br />
verify that the TARGET_WWPN device/path attribute<br />
has been properly specified <strong>and</strong> matches the hardware<br />
configuration. Follow normal procedures for resolving<br />
the problems indicated.<br />
Programmer Response: If the problem persists<br />
contact your <strong>IBM</strong> Support Center personnel to diagnose<br />
<strong>and</strong> correct the problem.<br />
H<strong>CP</strong>3571E fp_ioctl for SCIOLINQU failed. resource<br />
name=name, return value=value.<br />
Function: function<br />
Explanation: An internal request (fp_ioctl) to send a<br />
SCSI INQUIRY comm<strong>and</strong> to the device (LUN) has<br />
failed. This is done as part of loadDevice for a scsidisk<br />
device. If multiple paths to the device exist, resource<br />
Chapter 3. <strong>System</strong> <strong>Messages</strong> 337
Change language