z/VM: System Messages and Codes Š CP - z/VM - IBM

HDI002
Explanation: Incorrect parameters were passed to
entry point HCPHDITR.
User Response: Contact your IBM support personnel.
HDI003
Explanation: (soft abend) The virtual address range
cannot be addressed using the current level of the
address translation table.
User Response: Contact your IBM support personnel.
HDT001
Explanation: Incorrect parameters were passed to
entry point HCPHDTAA.
User Response: Contact your IBM support personnel.
HDT002
Explanation: Incorrect parameters were passed to
entry point HCPHDTVE, HCPHDTMA, or HCPHDTNL.
User Response: Contact your IBM support personnel.
HDT004
Explanation: A Region Table Entry changed while the
Region Table Entry lock was held.
User Response: Contact your IBM support personnel.
HDT005
Explanation: The input address range is too large to
be described by the address translation tables.
User Response: Contact your IBM support personnel.
HDU006
Explanation: A program error occurred that caused an
unsupported internal function to be invoked.
User Response: Contact your IBM support personnel.
HOT001
Explanation: (soft abend) A logical or SNA device has
received more than 50 consecutive unsolicited
interruptions. This is probably a software error in the
service machine for logical or SNA devices.
System operation continues.
User Response: R8 points to the device RDEV. For a
logical device, RDEVLSOP points to the logical
subchannel object. For a SNA device, RDEVSNA points
to the SNABK. Determine why the service machine is
creating/passing the unsolicited interrupts.
HOT002
Explanation: Entry Point HCPIISBX returned an
address of an RDEV for a base exposure of a
multiexposure device, but when the address was
passed to HCPCPXMX, HCPCPXMX indicated that the
device was not a base exposure.
User Response: R8 points to the RDEV. Determine
whether the RDEV represents a base exposure of a
multiexposure device or not. Inspect the logic in the
module that produced the incorrect result to determine
why the error is occurring.
HPC001
Explanation: This is a hard abend that is issued if one
of the following go negative:
v The address space count of resident pages,
ASCCTPRS or ASCCTPRG
v The virtual configuration wide count of private
resident pages, VMDCTPVR or VMDCTSHG
v The system wide count of shared address space
resident pages, VMDCTSHR or VMDCTSHG
User Response: R15 points to the place that detected
the cause for this abend.
Examine the dump to determine which counter is
negative.
HPC004
Explanation: The frame to be released is not marked
as owned, or its FRMTE is improperly chained.
User Response: R15 points to the place that detected
the cause for this abend.
Examine the dump to determine which reason caused
this abend.
HPC006
HDI002 HPC006
Explanation: This is a hard abend that is issued if one
of the following goes negative:
v The address space count of locked pages,
ASCCTPLK
v The virtual configuration wide count of private locked
pages, VMDCTPVL
v The system wide count of shared locked pages,
VMDCTSHL.
User Response: R15 points to the place that detected
the cause for this abend.
Examine the dump to determine which counter is
negative.
Chapter 2. System Codes 43