z/VM: System Messages and Codes Š CP - z/VM - IBM

HCP6885E HCP6892E
continue, contact Operations personnel. If you received
the third version, make sure you have specified the
correct minidisk to CP. If you have, issue a CMS
FORMAT command to format the disk, and then place
the information on it that CP needs for the IPL.
HCP6885E CP will not execute under CMS.
Explanation: You tried to invoke the CP module as a
program running under CMS. CP cannot run under
another program.
System Action: CP ignores the request and returns
control to CMS.
User Response: If you want to initialize CP, IPL a
volume containing the Stand- Alone Loader (SAL), and
have SAL load the CP module.
HCP6886I User userid
{changed|locked|unlocked|reset}
userid’s privilege classes[ from classes
to classes].
Explanation: You receive this message if another user
issued a CP SET PRIVCLASS command to change
your privilege classes, lock or unlock them, or reset
them to the ones specified in your user directory entry.
System Action: CP changes the privilege class
settings for the specified user ID; system operation
continues.
User Response: In most cases, none. If another user
has locked your privilege classes and you try to enter a
CP SET PRIVCLASS command to unlock them, CP will
prompt you for a password.
HCP6888I User userid issued a DIAGNOSE X'08'
with multiple commands ({LOG|FAIL}
mode).
Explanation: The system operator ID receives this
message when a user with a D8ONECMD setting of
LOG or FAIL has issued a DIAGNOSE code X'08' that
contains more than one CP command in its buffer.
System Action: If the setting is LOG, CP executes all
the commands contained in the buffer; system operation
continues. If the setting is FAIL, CP executes the first
command in the buffer, but ignores any others; system
operation continues.
User Response: Change the D8ONECMD setting for
the virtual machine, or change the program running in
the virtual machine to issue only one command with
each DIAGNOSE code X'08'.
418 z/VM: System Messages and Codes — CP
HCP6889E userid’s DIAGNOSE X’08’ options are
locked.
Explanation: You entered a SET D8ONECMD
command to change your D8ONECMD setting, which is
locked.
System Action: CP does not allow anyone, even
privileged users, to change his or her own D8ONECMD
setting if it has been locked. Therefore, CP rejects your
command, and system operation continues.
User Response: Have Operations personnel change
your D8ONECMD setting for you.
HCP6890E THIS VIRTUAL MACHINE CANNOT
ISSUE MULTIPLE COMMANDS USING
ONE DIAGNOSE X'08'.
Explanation: You issued a DIAGNOSE code X'08'
containing more than one command, and your
D80NECMD setting is FAIL.
System Action: CP processes the first command in
the DIAGNOSE code X'08' buffer, and rejects the rest.
System operation continues.
User Response: Have Operations personnel change
your D8ONECMD setting before you try to issue
another DIAGNOSE code X'08' containing more than
one command, or change your program so that it issues
only one command in each DIAGNOSE code X'08'.
HCP6891I userid issued DRAIN command for
volume volid on device rdev for
allocationtype1 [allocationtype2...]
Explanation: The system operator sees a version of
this message after a privileged user has issued a
DRAIN command to prevent operations on a certain
volume. This message tells you that the volume will no
longer accept commands asking for new operations in
one or more of the following categories:
v Page
v Links
v Spool
v Tdisk
System Action: CP marks the specified volume as
DRAINING for the categories the user indicated on the
command; system operation continues.
User Response: None.
HCP6892E Invalid number of buffer positions -
string
Explanation: You issued a CP SET PFnn RETRIEVE
FORWARD or BACKWARD command, and the keyword
you specified as the number of buffers has one of two
things wrong with it:
v It is not a decimal number, or