z/VM: System Messages and Codes Š CP - z/VM - IBM

HCP2339I HCP2347I
Operator Response: None.
HCP2339I LIBRARY libnum CLEANER VOLUME
EJECTED
Explanation: A volume used for cleaning operations
has been ejected from the library. It may need to be
replaced with a new cleaner volume
System Action: System operation continues.
Operator Response: Insert a new cleaner volume into
the library.
HCP2340I TAPE rdev OPERATION TERMINATED
BECAUSE FILE WAS NOT FOUND
Explanation: An operation was terminated because
I/O was issued to position the tape to a specific file
number and the file either could not be found or could
not be validated.
System Action: System operation continues.
Operator Response: Rewind the tape and retry the
operation. If the problem persists, contact your system
support personnel.
HCP2341I TAPE rdev OPERATION TERMINATED
BECAUSE PARTITION WAS NOT
FOUND
Explanation: An operation was terminated because
I/O was issued to position the tape to a specific partition
number and the partition could not be found or could
not be validated.
System Action: System operation continues.
Operator Response: Rewind the tape and retry the
operation. If the problem persists, contact your system
support personnel.
HCP2342I TAPE rdev OPERATION TERMINATED
BECAUSE PHYSICAL INDEX WAS NOT
FOUND
Explanation: An operation was terminated because
I/O was issued to position the tape to a specific physical
reference index and the physical reference index could
not be found or could not be validated.
System Action: System operation continues.
Operator Response: Rewind the tape and retry the
operation. If the problem persists, contact your system
support personnel.
HCP2343I LIBRARY libnum VOLUME volser IS
MISPLACED
Explanation: The indicated volume was not found
during an operation.
System Action: System operation continues.
286 z/VM: System Messages and Codes — CP
Operator Response: Follow the problem
determination procedures for the specified error
condition. These procedures can be found in the
Operator’s Guide for the indicated tape library.
HCP2344I LIBRARY libnum VOLUME volser IS A
DUPLICATE AND HAS BEEN EJECTED
Explanation: The indicated volume was found in an
unexpected location and an audit of the library inventory
found a volume with the same volser where expected.
System Action: The duplicate volume is placed in a
convenient output station and system operation
continues.
Operator Response: Follow the problem
determination procedures for the specified error
condition. These procedures can be found in the
Operator’s Guide for the indicated tape library.
HCP2345I LIBRARY libnum VOLUME volser IS A
DUPLICATE AND HAS BEEN LEFT IN
THE INPUT STATION
Explanation: The indicated volume was found in an
input station but an audit of the library inventory found a
volume with the same volser to already exist in the
expected storage cell.
System Action: The duplicate volume is left in the
input station and system operation continues.
Operator Response: Follow the problem
determination procedures for the specified error
condition. These procedures can be found in the
Operator’s Guide for the indicated tape library.
HCP2346I LIBRARY libnum VOLUME volser IS
UNREADABLE AND HAS BEEN LEFT
IN THE INPUT STATION
Explanation: The indicated volume was found in an
input station but either it did not have an external label
or the label was unreadable by the vision system.
System Action: The volume is left in the input station
and system operation continues.
Operator Response: Follow the problem
determination procedures for the specified error
condition. These procedures can be found in the
Operator’s Guide for the indicated tape library.
HCP2347I LIBRARY libnum VOLUME volser IS
UNEXPECTED AND HAS BEEN
EJECTED
Explanation: The indicated volume was found in a
storage cell or other position that was not expected.
System Action: The volume is placed in a convenient
output station if it had an unreadable external label or if