z/VM: System Messages and Codes Š CP - z/VM - IBM

HCP1713I HCP1752E
Operator Response: Contact your IBM Support
Center personnel to diagnose and correct the hardware
problem.
HCP1713I The crypto installed domain bit map bit
map does not match the available CAM
queue bit map bit map. CP will use bit
map
Explanation: CP detected that at least one CAM
queue corresponding to a crypto domain is unavailable
even though the domain is installed. The bits in the
installed domain bit map correspond to domains zero
through fifteen, from left to right. The bits in the
available CAM queue bit map correspond to CAM
queues zero through fifteen, from left to right. A value of
one in a bit position indicates that the domain is
installed or that the CAM queue is available. The bit
map of the domains and CAM queues that CP will use
is the logical AND of the domain bit map and the CAM
queue bit map.
System Action: CP does not use the mismatched
domains and CAM queues.
Operator Response: No immediate action is
necessary. Contact your IBM Support Center personnel
to diagnose and correct the hardware problem.
HCP1716E Crypto cpuid cannot be defined
because the maximum number of
crypto facilities is already defined for
this configuration
Explanation: You attempted to define a cryptographic
facility for more than two virtual CPUs in your virtual
machine configuration. This may have been done either
by entering the DEFINE CRYPTO command for multiple
CPU addresses, or from multiple CPU statements with
the CRYPTO option in the CP directory entry for your
virtual machine.
System Action: CP defines the maximum of two
cryptographic facilities and processing completes.
User Response: None.
Operator Response: None.
HCP1717I AP apnum Queue queuenum is already
in use by another user.
Explanation: On the user’s CRYPTO directory control
statement to specify an AP queue to be dedicated to the
user at logon, the APDEDicated operand was specified
with apnum and the DOMAIN operand was specified
with queuenum, but this queue is also specified on
another user’s CRYPTO directory control statement and
that other user has already logged on and obtained
dedicated use of this queue.
System Action: The command is not executed;
system operation continues.
246 z/VM: System Messages and Codes — CP
User Response: Log on at another time when that
other user isn’t logged on, or else contact the system
administrator to have a different queue assigned in the
user directory.
HCP1718I AP apnum Queue queuenum is not
available for dedicated use.
Explanation: On the user’s CRYPTO directory control
statement to specify an AP queue to be dedicated to the
user at logon, the APDEDicated operand was specified
with apnum and the DOMAIN operand was specified
with queuenum, but this queue is not available in the
hardware configuration.
System Action: The command is not executed;
system operation continues.
User Response: Contact the system administrator to
have a different queue assigned.
HCP1719I No AP Crypto Queue is available for
shared use.
Explanation: The APVIRT operand was specified on
the user’s CRYPTO directory control statement to
authorize the user for AP queue-sharing, but no crypto
queues are available to be used for queue-sharing in
the hardware configuration. This could mean that no
PCI crypto cards are installed, or that all of the installed
crypto queues are designated for dedicated use.
System Action: The command is not executed;
system operation continues.
User Response: Contact the system administrator to
install the PCI crypto cards, or to update the directory to
set aside some queues for queue-sharing.
HCP1750E An error has been detected in the CP
directory. Re-create the CP directory
using the DIRECTXA command.
Explanation: CP detected an error in the contents of
the directory while reading a virtual machine definition
from the directory.
System Action: System operation continues with a
virtual machine definition that is possibly erroneous.
Operator Response: Recreate the CP directory using
the DIRECTXA command.
HCP1752E No directory could be initialized.
Explanation: During initialization, CP found no
directory that could be brought online.
System Action: The system completes initialization
and forces LOGON of the operator.
Operator Response: Contact your system support
personnel.
Programmer Response: The volume that has the