z/VM: System Messages and Codes Š CP - z/VM - IBM

HCP8162E HCP8172E
User Response: The command must be reentered
correctly.
HCP8162E FATAL I/O ERROR READING DUMP,
FSREAD RC = rc
Explanation: An irrecoverable I/O error occurred
during the reading of the dump from a CMS disk or SFS
directory. A CMS error message describing the error
that occurred may precede this message.
System Action: Command processing is terminated.
User Response: Refer to the documentation on the
CMS FSREAD macro to determine the error that
corresponds to the given return code. Issue the
command again after you correct the error.
HCP8164E DUMP FILE NAME filename IS NOT A
VALID CMS FILENAME
Explanation: The dump file name entered is not valid.
Valid file names are in the form PRBxxxxx where xxxxx
is a one-to-five character string consisting of 0–9, A–Z,
@, $, and #.
System Action: The command does not run; system
operation continues.
User Response: Reenter the DUMPLOAD command
using an acceptable file name. If necessary, rename the
file before reentering the DUMPLOAD command.
HCP8166E WRONG INPUT TAPE MOUNTED
Explanation: The tape mounted is either not a dump
tape or not the correct volume of a multivolume dump.
System Action: The system rewinds and unloads the
tape. When another tape is mounted, the system
continues reading that volume header.
User Response: Mount the proper tape.
HCP8167I VIRTUAL MACHINE DUMP FROM
product V0nR0nMn
Explanation: The dump being processed by the
DUMPLOAD command is a virtual machine dump. This
message displays the product and release of the
VMDUMP that produced the dump.
System Action: System operation continues.
User Response: None.
HCP8168I VIRTUAL MACHINE DUMP, FORMAT =
vmtype, DUMPID = dumpid
Explanation: The type and dump ID of the virtual
machine dump that DUMPLOAD is currently processing
appears at your display device to let you verify that you
are processing the correct dump. The dump type and
identifier correspond to the first address space dumped.
434 z/VM: System Messages and Codes — CP
Message HCP8156A then appears to ask if you want to
process the dump.
System Action: System operation continues.
User Response: No response to message number
HCP8168I is necessary.
HCP8169I DUMP IS NOT COMPLETE
Explanation: The dump in the CMS file is not
complete. The reason may be the dump was not
complete when it was taken, or the dump was not
completely loaded by the DUMPLOAD command.
System Action: This message is issued and
DUMPLOAD terminates.
User Response: If the dump was incomplete because
of any I/O errors, correct the errors and reload the
dump.
HCP8170E THERE ARE NO DEFAULT FILE NAMES
AVAILABLE.
Explanation: The tape or the spool file dump cannot
be processed because dump files with names
PRB00000 through PRB99999 already exist on the
CMS disk being accessed.
System Action: The command is not executed.
User Response:
v Rename any of the existing dump files using the
Dump Viewing Facility DUMPNAME command and
reissue the DUMPLOAD command. DUMPLOAD
uses the default dump file name you have made
available.
v Or rename any of the existing dump files using the
CMS RENAME command and reissue the
DUMPLOAD command. DUMPLOAD uses the default
dump file name you have made available.
v Or reissue the DUMPLOAD command and use the
OUTFILE option to specify a file name for the set of
new files.
HCP8171I SYSGEN SIZE REACHED, NO EOF ON
DUMP FILE
Explanation: CP reached its defined storage size
while reading or writing a CMS dump file, but there is
more data in the dump.
System Action: The CMS dump file is closed.
User Response: Notify the system programmer; the
dump may be incorrect.
HCP8172E PERMANENT TAPE I/O ERROR
Explanation: A permanent I/O error occurred while the
system abend or stand-alone dump was being read
from tape.